Overhead line electrification at Great Bentley
Railway electrification in Great Britain began during the late 19th century. A range of voltages has been used, employing both overhead lines and conductor rails; the two most common systems are 25 kV AC using overhead lines and the 750 V DC third rail system in southeast England and on Merseyrail. In 2006, 40%—Template:Convert of the British rail network was electrified, and 60% of all rail journeys were by electric traction (both by locomotives and multiple units).[1] According to Network Rail, 66% of the electrified network uses the 25 kV AC overhead system, and 36% uses the 660/750 V DC third-rail system.[1]
The electrified network is set to expand over coming years, as 25 kV electrification is extended to currently unelectrified lines such as the Great Western Main Line, the Midland Main Line and lines in the North of England as part of the Northern Hub.[2] Template:TOC right
History[]
The first electric railway in Great Britain was the Volk's Electric Railway in Brighton which opened in 1883, and still functions to this day. The London Underground began operating electric services using a fourth rail system in 1890. Main line electrification of some suburban lines began in the early years of the 20th Century, using a variety of different systems. In 1921 a government committee chose 1,500 V DC overhead to be the national standard,[3] but little implementation followed and many different systems co-existed. During the interwar years, the Southern Railway adopted the 660 V DC third rail system as its standard and greatly expanded this system across its network of lines south of London.
After World War II and the nationalisation of the railways in 1948, British Railways expanded electrification at both 1,500 V DC overhead and 660/750 V third rail. In 1956, British Railways adopted 25 kV AC overhead as standard for all projects outside logical extensions of third-rail systems.[4]
The 25 kV AC network has continued to expand slowly, and large areas of the country outside London are not electrified. In 2007 the government's preferred option was to use diesel trains running on biodiesel, its white paper Delivering a Sustainable Railway,[5] ruling out large-scale railway electrification for the following five years.
In May 2009 Network Rail launched a consultation on large-scale electrification, to potentially include the Great Western Main Line and Midland Main Line and smaller "in-fill" schemes. Key benefits cited were that electric trains are faster, more reliable and cause less track wear than diesel trains.[6] Since then, electrification of the Great Western Main Line has been approved; electric trains are planned to run to Bristol from 2016 and Cardiff from 2017.[7] Electrification of the Midland Main Line, several Trans-Pennine routes and the Welsh Valleys has also been approved.
In Scotland, where transport is devolved to the Scottish Government, Transport Scotland is extending electrification, for example, on the Airdrie-Bathgate Rail Link. This is part of a larger plan that sees many major routes in central Scotland electrified, including the main Edinburgh-Glasgow Queen St route.
Proposed developments[]
In June 2011, Peter Dearman of Network Rail suggested that the third-rail network will need to be converted into overhead lines. He stated, "Although the top speed is 100mph, the trains cannot go over 80mph well and 25% of power is lost from heat". Agreeing that conversion would be expensive, he said that the third-rail network is at the limit of its power capability, especially as trains become more advanced in technology.[8] The July 2012 Department for Transport High Level Output Specification for Network Rail Control Period 5 includes the conversion of the South West Main Line between Southampton and Basingstoke from 750 V DC third rail to 25 kV AC overhead as part of a scheme to improve rail freight capacity from Southampton Port. This conversion is a pilot scheme to develop a business case for full conversion of the third rail network.[9]
Existing systems – overhead line (OHL)[]
National Rail: 25 kV, 50 Hz AC overhead[]
British Railways chose this as the national standard for future electrification projects outside of the third rail area in 1956. Following this, a number of lines which were originally electrified at a different voltage were converted, and a number of lines have been newly electrified with this system. Work started in the late 1950s. The first major electrification project using 25 kV was the West Coast Main Line (1959-1974). The 25 kV network has been gradually expanded ever since:
Existing[]
An electric express on the West Coast Main Line in the 1970s.
- Electrified from the late 1950s to the mid-1960s under the BR 1955 Modernisation Plan to Crewe (and branches), extended to Glasgow in 1974.
- Northampton: see Northampton Loop Line.
- Birmingham (New Street): see Rugby-Birmingham-Stafford Line.
- Liverpool (Lime Street)
- Manchester (Piccadilly): see Stafford to Manchester Line and Crewe to Manchester Line.
- Glasgow (Central): in 1974, from Weaver Junction
- The "Abbey Flyer" (St Albans Branch Line) was electrified 1987-88 by Network SouthEast.
- Edinburgh (Waverley) in 1989 (from Carstairs Junction in conjunction with ECML electrification)
- In 2003, the Crewe to Kidsgrove section of the Crewe to Derby Line was electrified as a diversionary route for the WCML.
- Since 1999 the line has been modernised and the overhead line equipment has been refurbished and renewed from Mark 1/3 to UK1 series to allow an increase line speeds from 110 mph to 125 mph.
- London, Tilbury and Southend (LTS)
The majority was originally electrified at 6,250 V, converted to 25 kV in the early 1980s.
- West Anglia / Fen Line
This covers the lines from London Liverpool Street (Bethnal Green Jn) to Chingford, Enfield Town, Hertford East and Cambridge. In the 1960s the lines to Chingford, Enfield Town and Cheshunt were electrified at 6,250 V, from Cheshunt to Bishop's Stortford and Hertford East at 25 kV. The Lea Valley line between Coppermill Junction and Cheshunt was electrified at 25 kV in 1969. All the 6,250 V areas were converted to 25 kV in 1983. In 1987, electrification was extended from Bishop's Stortford to Cambridge at 25 kV. In 1990 the line to Stansted Airport opened, and in 1992 electrification was extended from Cambridge to King's Lynn along the Fen Line.
- Great Eastern Main Line (GEML)
- Converted from 1,500 V DC (see 1,500 V DC section "Shenfield Metro")
- Converted from 6,250 V/1,500 V DC
- Romford to Upminster Line
- Shenfield to Southend Line
- Crouch Valley Line
- Braintree Branch Line
- Colchester to Clacton Line
- Mayflower Line
- Sunshine Coast Line
Intercity 225 on the East Coast Main Line
- Electrified in two parts: 1975-78, and 1984–91
- The line between London (Kings Cross) and Royston was electrified between 1976 and 1978 as part of the Great Northern Suburban Electrification Project. This included the Hertford Loop Line. The section between Royston and Cambridge was electrified in 1988.[10]
- In 1984, authority was given to electrify to Edinburgh and Leeds. The section between Hitchin and Peterborough was completed in 1987, and Doncaster and York were reached in 1989. By 1990 electrification had reached Newcastle, and in 1991 Edinburgh.
- In order to keep construction teams working, two additional schemes were authorised, to Carstairs and North Berwick (North Berwick Line).
- At the peak of the electrification project during the late 1980s, it was claimed to be the "longest construction site in the world" at over Template:Convert.
- Electrified between London (St Pancras) and Bedford in 1983, and Dock Junction to Moorgate - now cut back to Farringdon.
- Electrification from Bedford to Sheffield via Derby, Trent Junction to Nottingham and Kettering to Corby are expected by 2018 as part of the Department for Transport High Level Output Specification for 2014-2019.
Template:See also
- London Paddington to Heathrow Airport
Electrified in 1994 in a joint venture between British Rail and the British Airports Authority. Using part of the Great Western Main Line.
Newest main line, completed in 2007. Links London (St Pancras) with Kent and the Channel Tunnel.
- London local lines
Local lines within London to be electrified with 25 kV are:
- North London Line, between Acton Central and Stratford.
- Various other suburban lines in the north of the city are electrified as part of other routes mentioned above.
- Edinburgh
- In 1991 the ECML to Edinburgh was electrified. A few local routes were electrified, but most local services were not.
- Edinburgh Crossrail: Edinburgh Waverley to Newcraighall. The service is by DMUs, pending reopening of part of the Waverley Line.
- North Berwick Line: Edinburgh Waverley to North Berwick
- Glasgow to Edinburgh via Carstairs Line: some North Berwick Line trains continue to Glasgow Central. Intercity trains from the ECML continue to Glasgow Central.
Template:See also
- Central Scotland
The route from Edinburgh to Glasgow via Bathgate has been reinstated between Bathgate and Airdrie and electrified throughout. It opened on 11 December 2010. Approval has also been given by the Scottish Parliament for electrification of the main inter-city route between Edinburgh and Glasgow Queen Street High Level via Falkirk. The project, known as EGIP, was scheduled to encompass infill electrification in the Glasgow area and Greenhill Junction to Stirling, Dunblane and (recently re-opened) Alloa, which mainly carry commuter services, but these were removed in 2012 as part of a cost review.
- Glasgow Suburban
Suburban electrification was begun during the 1960s in the wake of the BR 1955 Modernisation Plan. Electrification was piecemeal during the preceding year and is still incomplete, with several suburban, rural and intercity lines still unelectrified. Template:See also
The Glasgow Suburban railway network can be divided into three main areas:
- North Clyde Line: also known as the "Glasgow North Electric Suburban Line", one of the first lines in Glasgow electrified in 1960 (Helensburgh Central, Balloch and Milngavie to Glasgow Queen Street (Low Level) and to Springburn and Airdrie).
- South Clyde: the Cathcart Circle Line (Glasgow Central to Newton and Neilston) was electrified on 22 May 1962.[11] The Inverclyde Line (Glasgow Central to Gourock and Wemyss Bay) was electrified in 1967.[11] The Ayrshire Coast Line (Glasgow Central to Ayr, Largs and Ardrossan Harbour) was electrified in 1986–1987.[12] The Paisley Canal Line was electrified to Corkerhill from Glasgow Central, in late 2012 extended to Paisley.
- Argyle Line: between Dalmuir and Milngavie via Glasgow Central (Low Level) to Hamilton Circle, Larkhall, Lanark and Carstairs (via Hamilton, Motherwell or Holytown). There is also peak service to Coatbridge Central.
On the Glasgow to Edinburgh via Carstairs Line, some North Berwick Line trains continue to Glasgow Central. A single daily East Coast intercity train from the ECML continues to and from Glasgow Central. On the Motherwell to Cumbernauld Line, Motherwell to Coatbridge is electrified: Coatbridge to Cumbernauld will be under the EGIP project. On the Shotts Line Holytown Junction to Kirknewton is not electrified, but both ends are, shared with the WCML, Argyle Line and ECML. The Whifflet Line between Whifflet and Rutherglen via Carmyle is not electrified, although there are plans to do so by 2014.[13] Whifflet station is electrified, as part of the Motherwell to Cumbernauld line.
- Leeds area
In 1994, a project to electrify some of the local lines around Leeds was given authority to proceed. The project was called the "Leeds North West Electrification", which electrified:
- Airedale Line to Skipton and Bradford Forster Square
- Wharfedale Line to Ilkley
- Wakefield Line electrified in 1989 as part of the East Coast Main Line electrification to London King's Cross
- Harrogate Line: proposed; business case submitted
- Manchester area
- Manchester to Glossop / Hadfield (converted from the truncated 1500 V DC Manchester-Sheffield-Wath electric railway)
- Manchester, South Junction and Altrincham Railway (part was converted to Manchester Metrolink)
- Styal Line (primarily operated by diesel multiple units)
- Stafford to Manchester Line: branch of the WCML, electrified in the wake of the BR 1955 Modernisation Plan
- Crewe to Manchester Line: branch of the WCML, electrified in the wake of the 1955 Modernisation Plan
- West Midlands
- West Coast Main Line routes electrified in the 1960s:
- Trent Valley Line
- Stone to Colwich Line
- Rugby-Birmingham-Stafford Line
- Stafford to Manchester Line
- Walsall to Wolverhampton Line
- Commuter lines out of Birmingham New Street:
- Cross-City Line: electrified 1993.
- Chase Line: New Street to Walsall electrified 1966.
2010s National Rail electrification programme[]
In July 2012 the UK government announced £4.2 billion of new electrification schemes,[2] all at 25 kV AC: These will be:
- Northern Hub
As part of the Northern Hub project, the following lines in North West England and Yorkshire are to be electrified by 2020:
- Liverpool to Manchester Line: Manchester to Newton-le-Willows completed December 2013; to Liverpool by December 2014.[14][15]
- Liverpool to Wigan Line, by December 2014.[16]
- Manchester to Preston (via Bolton) and Preston to Blackpool North: by December 2016.[14][17][18] - this will provide an electrified route from Blackpool to the West Coast Main Line and Blackpool and Preston to Manchester. As a spin-off, in December 2013 it was announced that the branch from Bolton to Wigan North Western would also be electrified by 2017.[19]
- The North TransPennine route, comprising the Huddersfield Line between Manchester Victoria and York via Huddersfield and Leeds: expected between 2016 and 2018.[17][20]
- As an extension of this the Hull to Selby Line may follow: First Hull Trains' plans to electrify the line between Temple Hirst Junction on the East Coast Main Line south of Selby and Hull using private finance. This moved closer to reality on 20 Mar 2014 when Transport Secretary Patrick McLoughlin confirmed in the House of Commons that he had made £2.4m available to move the project to the next stage of development, GRIP Stage 3.[21] This scheme will join the already planned transpennine electrification (part of the Northern Hub project) at Selby.
- Windermere Branch Line: In August 2013, the Department for Transport announced that the branch line between Oxenholme and Windermere is to be electrified by 2016.[22]
- Great Western Main Line/South Wales Main Line
- The GWML and SWML and associated branch lines will be electrified to Bristol Temple Meads, Cardiff Central, and Swansea. Electrification will also reach Oxford and Newbury. (See 21st Century upgrade of the Great Western Main Line).
- As a spin-off, the Valleys & Cardiff Local Routes will be electrified at the same time.[23]
- Already electrified to Bedford. This will be extended to Corby, Leicester, Nottingham, Derby and Sheffield.
- Electrification of the lines from the Port of Southampton to Nuneaton, and to the Midland Main Line via the East West Rail Link between Oxford and Bedford. This would involve electrifying the Coventry to Nuneaton, and Coventry to Leamington Line, part of the Chiltern Main Line, Cherwell Valley Line and Reading to Basingstoke Line; also converting part of the South Western Main Line between Basingstoke and Southampton from 750 V DC third rail to 25 kV overhead.[24]
New cross-London main line due to open 2018.
- Electrification announced July 2013.[25]
- West Midlands suburban
Extensions to the existing West Midlands suburban electrification:
- Cross-City Line electrification extended from Barnt Green to Bromsgrove by 2016.[26]
- Chase Line electrification extended from Walsall to Rugeley Trent Valley by 2017.[27]
Tyne & Wear Metro is the only 1,500 V DC system in the UK.
Non-NR systems[]
1,500 V DC, overhead[]
- Tyne and Wear Metro: The Tyne and Wear Metro, which opened in 1980, is now the only system left in the UK using the 1500 V DC overhead lines. Although it is often described as "light rail", it is closer to a heavy metro, using only segregated track. Much of its route follows that of the previous Tyneside Electrics, which had been converted to diesel by 1967. Since 2002, the Metro has shared main-line track on the Durham Coast Line to Sunderland. This presents a potential problem for main-line services if routes into Sunderland or Newcastle upon Tyne that use this section were to be electrified at 25 kV AC.
Historically there were more lines electrified at 1,500 V DC, but these have all since been either converted to 25 kV AC or closed. (see 1,500 V DC, overhead (historic))
750 V DC, overhead[]
Tram on the Manchester Metrolink; Like most modern tram systems, it uses 750 V DC
Used on several tram systems:
- Edinburgh Trams
- Manchester Metrolink
- Sheffield Supertram
- Croydon Tramlink
- Nottingham Express Transit
- Midland Metro
Other overhead systems[]
- Blackpool Tramway: originally 550 V DC, in 2011 upgraded to 600 V to operate more modern rolling stock.
- The National Tramway Museum at Crich, Derbyshire uses 550 V DC. This voltage was chosen for maximum compatibility with its historic fleet of trams as well as more modern units.
- The Seaton Tramway uses 120 V DC.
Existing systems - third and fourth rails[]
National Rail: 650 V - 750 V DC, third rail (top contact)[]
Lines through Clapham Junction equipped with third rail electrification.
- Southern Electric
The extensive southern third rail electric network covers south London and the southern counties of Dorset, Hampshire, West and East Sussex, Surrey and Kent.
The London and South Western Railway (L&SWR) third-rail system at 660 V DC began before World War I from Waterloo to suburban destinations. The Southern Railway was formed in the 1923 grouping; it adopted the L&SWR system, and by 1929 the London, Brighton and South Coast Railway (LB&SCR) suburban overhead network was replaced by third rail. The South Eastern Main Line was electrified at 600 V, later upgraded to 750 V DC. The third rail extended throughout most South London lines out of all its London termini. Throughout the 1930s there was much main line electrification, including the Brighton Main Line (including East, West Coastways and related routes in 1932-1933), the Portsmouth Direct Line (4 July 1937) and to Maidstone and Gillingham (1939).
After World War II, electrification was soon resumed in the newly nationalised British Rail's Southern Region. The BR 1955 Modernisation Plan included the two-stage "Kent Coast Electrification". The Chatham Main Line was completed, followed by the South Eastern Main Line and related lines. The voltage was raised from 660 V to 750 V.[28] Since then, all electrification has used 750 V; lines electrified before then remain at 660 V. Attention then switched to the neglected former L&SWR area (then the South Western Division). The South Western Main Line (SWML) to Southampton and Bournemouth was electrified in 1967 and to Weymouth in 1988.
During sectorisation in the 1980s, Network SouthEast conducted extensive infill electrification. The Snow Hill tunnel was reopened, enabling Thameslink. The Hastings Line, Eastleigh to Fareham Line and the Oxted Line (East Grinstead branch) were electrified. This left only a few lines unelectrified: the West of England Main Line, the Wessex Main Line, the North Downs Line, the Oxted Line (Uckfield branch), and the Marshlink Line.
Two lines of the Merseyrail network; the Northern Line and the Wirral Line use 750 V DC third rail[29][30] (see Suburban electrification of the London, Midland and Scottish Railway for its history).
- London and North Western Railway (L&NWR)
- Euston and Broad Street to Watford Junction and Croxley Green (Watford DC Line)
- Richmond – North Woolwich (North London Line)
See Suburban electrification of the London, Midland and Scottish Railway for its history.[31] In 1970 the North London DC lines and the Class 501 EMUs used on these services were converted for third-rail operation, with the fourth rail generally being removed on sections not used by LUL. Some fourth rail was retained in the Gunnersbury and Queens Park areas for emergency use by LUL. With the closure of Broad Street, the North London Line was joined with the Stratford to North Woolwich line; this was electrified with third rail and overhead line as far as Stratford, third rail to North Woolwich. Two branches of the Watford DC Line have been closed: to Rickmansworth in 1952 (to passengers, to goods in 1967) and to Croxley Green in 1996.
The Watford DC Line between Queens Park and Harrow & Wealdstone and the North London Line between Richmond and Gunnersbury are used by London Overground trains designed for 750 V third rail and Bakerloo line trains designed for 630 V third and fourth rail. As a compromise the nominal line voltage is 650 V, and since 1970 the centre rail has been bonded to the return running rail.[32] There are no special provisions required at Queens Park, where the two dissimilar systems meet, just a gap longer than one coach of a Bakerloo line train at the entry to (and exit from) the Bakerloo, which operates with a nominal -210 V on the fourth rail and +420 V on the third rail. There is no bridging of the incompatible systems as trains pass from one to the other since, like all UK electric trains intended to run extensively in tunnels, there is no continuity of traction power circuits between vehicles of the train.
A similar arrangement applies between Putney Bridge and Wimbledon, where the District line runs over tracks owned by Network Rail, also used by South West Trains, normally only for stock movements.
- Northern City Line
The Northern City Line connects the East Coast Main Line to Moorgate. It was isolated by the abandonment of the 1930s "New Works" programme (and the development of the Metropolitan Green Belt). Tube services were truncated at its northern end by the Victoria line in 1964 at Drayton Park. The remainder was handed over to BR in 1975 in conjunction with the suburban electrification of the East Coast Main Line. The line uses third-rail DC electrification between Moorgate and Drayton Park, where trains switch to 25kV AC overhead.
630 V DC, third rail (top contact)[]
The single remaining national rail line on the Isle of Wight was electrified in 1967, so that former London Underground rolling stock could be used, due to the limited height of Ryde Tunnel. The Island Line used 630 V DC third rail, as it was a cheaper option to convert the LUL stock into third rail, and implement third rail only on the line. The rolling stock currently used is BR Class 483s.
630 V DC, fourth rail (top contact)[]
The Tube's fourth-rail system
London Underground track, showing the third and fourth rails beside and between the running rails
The London Underground is a large metro system operating across London and beyond, commonly known as "the Tube". It Template:Convert[33] is made up of 11 lines; electrification began during the 1890s. It was largely unified between 1900 and 1910 and nationalised in 1933, becoming the railway component of London Transport (LT). A major expansion programme (the "New Works") was launched, in which LT took over several urban branches of mainline railways.
The Underground is mostly in north London; its expansion into south London was limited by geology unfavourable to tunnelling and by the extensive main-line network, much of which was being electrified (see "Southern Electric"). The Underground uses a relatively uncommon four rail system of electrification. Two standard gauge rails are the running rails; the outer third rail carries positive current at +420 V DC and the inner fourth rail is the negative return at –210 V DC, giving a supply voltage of 630 V DC. The chief advantage of the fourth-rail system is that, in tunnels with a metallic (usually cast-iron) lining, the return traction current does not leak into the lining causing electrolytic corrosion there or in the neighbouring utility mains. The two running rails are available exclusively for track circuits.
The surface sections use the fourth rail solely for operational consistency; the system shares track with Network Rail in several places. Some of these are non-electrified sections of the national railway network (e.g. Chiltern Railways out of Marylebone station), and diesel trains are used. Where the track is shared with 750 V third-rail stock, the central rail is bonded to the running rails and the outside rail electrified at 660 V. This allows both types of train to operate satisfactorily. The suburban network of the London & North Western Railway (LNWR) was electrified in co-operation with the Underground, but during the 1970s British Rail introduced third-rail EMUs and the sections of the LNWR suburban network not used by the Underground had the fourth rail removed (see "London and North Western Railway", above).
The Underground has carried out studies to consider raising the voltage above the present 630 V nominal.[34] New equipment at their substations does allow for a future increase to a standard 750 V nominal. In addition, the electrical equipment of new trains are also based on the use of 750 V rated equipment. So whilst new equipment is being designed to for 750 V operation, no decision to increase the voltage has yet been made public by the Underground.Template:Citation needed
750 V DC, third rail (bottom contact)[]
This uses bottom-contact composite third rail, with an aluminium body and a steel contact surface. The advantage of this is a low-resistance, high-current-capacity rail with a durable steel surface for current collection. The rail may be surrounded by insulating material on the top and sides to reduce the risk of electrocution to railway staff and trespassers. The bottom-contact system is less prone to derangement by snow than top contact.
600 V DC, third rail (top contact)[]
- Glasgow Subway, electrified in 1935
250 V DC, third rail (top contact)[]
- Hythe Pier Railway, electrified in 1922
110 V DC, third rail (top contact)[]
- Volk's Electric Railway was originally electrified at 50 V DC, raised to 160 V in 1884 and reduced to 110 V DC during the 1980s.
100 V DC, four rail[]
- The elevated "monorail" at the National Motor Museum, Beaulieu uses rubber tyres running on two metal tracks, one on either side of the central guide. Because it is rubber-tyred, it requires two current conductors and two collectors (hence the four-rail designation).
Template:AnchorObsolete systems[]
Great Britain has used different electrification systems in the past. Many of these date from the early part of the 20th century, when traction electricity was in the experimental stage. This section describes each system, in order of decreasing voltage.
6,600 V 'Elevated Electric' train on the South London Line in c 1909
6,600 V, 25 Hz AC, overhead[]
- Lancaster to Heysham via Morecambe: Used for an early trial of electrification; opened between 13 April and 14 September 1908, and operated until 1953
- 'Elevated Electric' London suburban lines of the London, Brighton and South Coast Railway: The first large-scale suburban electrification scheme; starting with the Inner South London Line and then extended to other commuter lines around the south of London, operational from 1 December 1909. Following the grouping into the LBSCR into the Southern Railway in 1922, all of the 6,600 V lines were converted to the 650 V DC third rail system by September 1929.
6,250 V 50 Hz AC, overhead[]
During the initial electrification of parts of the network to 25 kV 50 Hz AC overhead, the initial solution to the limited clearance problems in suburban areas (due to numerous tunnels and bridges) in London and Glasgow was to use the lower voltage of 6,250 V. Later technological improvements in insulation allowed these areas to be converted to 25 kV. The last sections of 6,250 V were converted during the 1980s.
- London, Tilbury and Southend Lines
The 6.25 kV section was from Fenchurch Street to beyond Barking, with changeovers there on both the Upminster and Tilbury lines. The section between Chalkwell and Shoeburyness was also at 6.25 kV.[35] The remainder was at 25 kV. The sections electrified at 6,250 V were converted to 25 kV during the early 1980s.
- Great Eastern Lines
The line from Liverpool Street to Southend Victoria was originally electrified at 1,500 V DC overhead during the 1940s-50s. During the early 1960s, the whole of this line was converted to 6,250 V AC overhead, while the main line east of Shenfield was progressively electrified at 25 kV, with changeover east of Shenfield. During the early 1980s the line was again converted, this time to 25 kV.
The Cambridge line and branches from Liverpool Street was electrified in the early 1960s, with 6.25 kV out to a changeover at Cheshunt, and 25 kV beyond. The Chingford and Enfield lines were thus at 6.25 kV throughout. This route was again fully converted to 25 kV in the early 1980s.
As part of the electrification onwards to Cambridge and Norwich in the 1980s, electric locomotives were transferred to these routes from the West Coast route. These locomotives would not have been able to operate at 6.25 kV.
- Glasgow Suburban network
On the North Clyde the central section between Parkhead and before Dalmuir (Clydebank loop) and Westerton (Anniesland loop) were at 6.25 kV, with the outer sections at 25 kV. The Bridgeton and Springburn branches were thus at 6.25 kV throughout. The sections electrified at 6,250 V were converted to 25 kV during the early 1980s.
On the South Clyde the route from Glasgow Central around the Cathcart Loop was initially at 6.25 kV, with changeovers to 25 kV at Kings Park and Muirend on the Motherwell and Neilston routes. These lines were progressively converted to 25 kV in the 1970s-80s.
Template:See also
3,500 V DC, overhead[]
- Bury to Holcombe Brook
This was electrified by the Lancashire and Yorkshire Railway in 1913 as part of a trial system for export. The system was converted to third rail in 1918 (see above).[36]
1,500 V DC, overhead (historic)[]
After World War I, the UK Government set up a committee to investigate the various systems of railway electrification; in 1921, it recommended that 1,500 V DC overhead should be the future national standard.[3] Several schemes were implemented in its wake, but the Great Depression and World War II meant very little work was done. Technological advances after 1945 meant the 25 kV AC system was adopted instead for the West Coast Main line and Glasgow suburban electrification (as set out in the BR 1955 Modernisation Plan). However, at the same time large amounts of money had been (and were still being) spent converting several lines to 1,500 V DC.
- Manchester, South Junction and Altrincham Railway
A joint LMS and LNER scheme, it opened on 11 May 1931. The success of this scheme influenced LNER's later electrification schemes. The line was converted to 25 kV AC in 1971, but the stretch between Altrincham and Trafford Bar (plus the stretch between Trafford Bar and the Cornbrook viaduct) were later incorporated into Manchester Metrolink and converted again (this time to 750 V DC).[37]
EM1 (Class 76), 1,500 V DC electric locomotives on the Woodhead Route in 1954
- Manchester – Sheffield – Wath
Known as the Woodhead Route, the LNER chose this hilly (and busy) main line for its first mainline electrification, with work beginning in 1936.[38] Due to the Depression and World War II, it was not completed until the 1950s. After completion, the government chose to standardise on 25 kV AC instead, leaving the Woodhead Route and the few other 1,500 V DC lines isolated and non-standard. The passenger locomotives were sold in 1969 and saw further service in the Netherlands. In a subsequent rationalisation, BR closed much of this route east of Hadfield in 1981 in favour of the more southerly Hope Valley Line, which serves more local communities. A section of the line between Manchester, Glossop and Hadfield remained open as part of the Manchester suburban network, and was operated by Class 506 EMU's, until it was converted to 25 kV AC in December 1984.
- Shenfield Metro
The LNER decided to electrify the Liverpool Street to Shenfield section of the Great Eastern Main Line (GEML), known as the Shenfield Metro. Civil engineering works began during the 1930s, but World War II intervened. Work was completed in 1949 and extended to Chelmsford and Southend Victoria in 1956, using Class 306 (AM6) EMUs.[39] It was converted to the new standard of 25 kV AC (initially with some sections at 6,250 V) on 4–6 November 1960, in the wake of the BR 1955 Modernisation Plan which called for 25 kV AC to be the new standard. The rest of the GEML was subsequently electrified.
- Shildon to Newport
This line ran from Shildon (County Durham) to Newport (near Middlesbrough). The route was initially over the 1825 Stockton-to-Darlington line, then via Simpasture Junction (the former Clarence railway) through Carlton, Carlton Junction to Carlton South Junction, Bowesfield West Junction to Bowesfield Junction, through Thornaby and ending at Erimus Yard (Newport East). In the wake of the electrification of Tyneside by the NER, this coal-carrying line was electrified between 1 July 1915 and 1 January 1916 as a planned precursor to electrifying NER's busy York to Newcastle main line (part of the ECML). The LNER removed this electrification system in 1935 (between 7 January and 8 July); the decline in the coal market made it economically unfeasible to undertake the significant renewals required to continue electric operation. The locomotives were stored for other electrified routes.[40][41][42]
1,200 V DC, third rail (side-contact)[]
A Class 504 (1,200 V DC) train at Manchester Victoria station, weeks before closure for conversion to the Metrolink light-rail system
- Manchester Victoria - Bury
In 1916, the line between Manchester Victoria and Bury was electrified using 1,200 V DC third rail (side contact). The line between Bury and Holcombe Brook which had been electrified using 3,500 V DC overhead in 1913 was converted to this system in 1918. It was abandoned in 1991, when the line was converted to a 750 V DC system and became part of the Manchester Metrolink.[43][44]
650 V DC, overhead[]
- Swansea and Mumbles Railway
600 V DC, third rail[]
- Tyneside Electric
This was electrified in 1904, in response to extensive competition from new electric trams. The concept was a success for the North Eastern Railway (NER), a noted pioneer in electrification, as passenger numbers returned to pre-tram levels.[45] As the stock reached life expectancy in 1937, the network was remodelled by London and North Eastern Railway (LNER) to reflect the changing industrial and residential makeup of the area.[46] Electrified at the same time was the dockside branch, where a pair of Class ES1 (formerly NER No.1 and 2) locomotives were introduced in 1905. These British Thomson-Houston locomotives operated from both the third rail and overhead line. British Rail brought in third-rail stock (12 2EPBs) from the Southern Region in 1955. British Rail removed the electrification between 1963 and 1967, citing the changing industrial and population makeup of the area which reduced the need for electric traction. Much of the Tyneside network was later re-electrified (using 1500 V DC overhead) as the Tyne and Wear Metro.
525 V DC, third rail[]
NER No. 1 (Locomotion museum, Shildon)
- Liverpool Overhead Railway
The Liverpool Overhead Railway was one of the earliest electric railways in Great Britain. The first section, between Alexandra Dock and Herculaneum Dock, was opened in 1893. The line connected with Lancashire and Yorkshire Railway's North Mersey Branch. It was never nationalised, and closed on 30 December 1956 due to extensive corrosion throughout its iron infrastructure (which was deemed uneconomical to replace).
500 V DC, overhead[]
- Grimsby and Immingham Railway
500 V DC, third rail[]
- City and South London Railway
The City and South London Railway electrification was unusual (compared with later schemes) in that it used a three-wire DC system. This meant that although the offset centre third rail was electrified at +500 volts in the northbound tunnel, it was electrified at -500 volts in the southbound tunnel. The motors on the locomotives and the incandescent electric lamps in the carriages worked, regardless of the polarity of the supply. The three-wire system was adopted because the initial system was fed directly from the dynamos in the surface power plant at the Stockwell end of the line. It was important to minimise the voltage drop as much as possible, bearing in mind the rather steep gradient on the approach to King William Street station.
440 V DC, third rail[]
- Post Office Railway
Underground railway under London operated by the Post Office. Operated between 1927 and closure in 2003.
See also[]
- British electric multiple units
- List of British electric locomotives
References[]
- ↑ 1.0 1.1 Network Rail, 2003 Technical Plan, Chapter 11 "Network Capability", page 7 "Electrification". "Approximately 40% of the rail network is currently equipped with electrification. From page 1, total network is 30,764 km, 7,587 km of 25 kV AC, 4,285 km of 650/750 V DC and 28 km of 1500 V DV. Excludes CTRL, LUL, Old Danby test track, bulk of Tyne and Wear Metro, etc. NB it does not state what method of counting length of network is used - i.e. sidings, loops, double track etc. produce different numbers. The UIC statistics that are used in the chart showing electrification in Europe is based solely on line length. Thus on this count, 11,900 km (38.7%) is electrified. Of the electrified network, 65.8% is 25 kV AC, 36.0% is 650/750 V DC and 0.2% is 1,500 V DC.
- ↑ 2.0 2.1 Script error: No such module "citation/CS1".
- ↑ 3.0 3.1 Template:Cite journal
- ↑ Template:Cite journal
- ↑ Delivering a Sustainable Railway - White Paper CM 7176Template:Dead link
- ↑ Rail Magazine June 3-June 16, 2009 "Network Rail's strategy to extend electrification by 3,000 miles" page 6
- ↑ Script error: No such module "citation/CS1".
- ↑ Rail Magazine: Issue 673, Page 14-15, 29 June - 12 July 2011.
- ↑ http://assets.dft.gov.uk/publications/hlos-2012/railways-act-2005.pdf paragraph 37
- ↑ Script error: No such module "citation/CS1".
- ↑ 11.0 11.1 Template:Cite journal
- ↑ Script error: No such module "citation/CS1".
- ↑ http://www.networkrail.co.uk/browse%20documents/StrategicBusinessPlan/RoutePlans/2008/Route%2026%20-%20Strathclyde%20and%20South%20West%20Scotland.pdf
- ↑ 14.0 14.1 North West Electrification, Network Rail. Accessed 16 July 2012
- ↑ Script error: No such module "citation/CS1".
- ↑ Network Rail
- ↑ 17.0 17.1 Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Electrification: Leeds-York is in, and more could follow, Rail News, 16 December 2011
- ↑ Script error: No such module "citation/CS1".
- ↑ "DfT Unveils Lakes Electrification Plans" Railnews news article 09-08-2013; Retrieved 2014-03-13
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1". Template:Dead link
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Template:Cite book
- ↑ Script error: No such module "citation/CS1".
- ↑ Template:Cite conference
- ↑ Template:Cite book
- ↑ Lancashire and Yorkshire Railway SocietyTemplate:Dead link
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Template:Cite journal
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
- ↑ Lancashire and Yorkshire Railway Society - History - P14Template:Dead link
- ↑ Lancashire and Yorkshire Railway Society - History - P15Template:Dead link
- ↑ Script error: No such module "citation/CS1".
- ↑ Script error: No such module "citation/CS1".
Further reading[]
525 V DC, third rail[]
- Template:Cite book
- Template:Cite book
- Template:Cite book
- Template:Cite book
630 V DC, fourth rail[]
- Template:Cite book
650 V DC, third rail[]
- Template:Cite book
750 V DC, third rail[]
- Template:Cite book
- Template:Cite book
1,500 V DC, overhead[]
- Template:Cite book
- Template:Cite book
6.6 kV 25 Hz AC, overhead[]
- Template:Cite book
25 kV 50 Hz AC, overhead[]
- Template:Cite book
- Template:Cite book
- Template:Cite book
- Template:Cite book
- Template:Cite book
External links[]
- Citytransport.info's Electrification advocacy page
- Kent Rail
- Lancashire & Yorkshire Railway Society Template:Wayback
- Southern E-mail Group
- Southern Electric Group
- Suburban Electric Railway Association
Template:Railway electrification