An electric multiple unit (EMU) is an electric train capable of operating in multiple with other EMUs that does not have a separate locomotive, typically passenger trains with accommodation in every vehicle and a driving position at each end. The term can also be used to describe a train such as the Advanced Passenger Train that was a permanent formation with a non-driving power car.[note 1] Template:As of two thirds of the passenger carriages in Britain are formed in EMUs.

Electric railways began in Britain in 1883 and the first EMU ran on the Liverpool Overhead Railway in 1893. In the early 20th century systems were developed where all the motors on a train could be controlled by a low voltage signal from any cab. Due to problems using steam locomotives underground, the underground railways in London and Liverpool were early adopters of 600V DC electric traction and by 1907 underground railways in London and some provincial cities were running electric trains. A 6.7 kV 25 Hz overhead system was also used from 1908. After the railway companies were grouped in 1923, the Southern Railway greatly expanded the 3rd rail DC electrification, replacing some early AC electrification. Overhead lines at 1500 V DC were planned and installed just before and after the second world war. The early EMU carriages, similar to contemporaneous locomotive-hauled carriages, were constructed of wood with hinged doors with accommodation in saloons or compartments. As time went on more steel became to be used in carriage construction.

After the second world war the railways were nationalised and the 25 kV 50 Hz overhead system became to be installed, eventually replacing the 1500 V DC systems. South of London, the Southern Railway 3rd rail electrification system continued to expand.


Early electric railwaysEdit

File:Liverpool Overhead Railway carriage.jpg

The Volks Electric Railway, the first electric passenger railway in Britain, opened in 1883Template:Sfn as a short Template:Convert gauge electric railway running for Template:Convert in Brighton. At first electrical power at 160 V DC was supplied to a small car using the two running rails, but it was not long before a third live rail was added, a sliding shoe making contact to the top.Template:Sfn

The City and South London Railway, a Template:Convert long deep-level tube railway, opened in 1890Template:Sfn with carriages hauled by electric locomotives powered from a third rail beneath the train energised at 500 V DC.Template:Sfn In 1893 the Liverpool Overhead Railway opened with two lightweight passenger cars coupled together;Template:Sfn[1] on each car one bogie was powered with a single Template:Convert motorTemplate:Sfn powered from a third rail between the tracks at 500 V DC.Template:Sfn Any number could be coupled together and all the motors controlled by the driver at the front.[1] In 1898 the deep-level Waterloo and City Railway opened with EMUs, a central third rail providing traction current at 500 V to 530 V DC.Template:Sfn The current for the two motor cars could be controlled from either driving cab, but the Board of Trade became concerned about the fire risk presented by the 11 power cables carried on the roof of the train and barred installation of similar systems in deep-level tubes.Template:Sfn Therefore, when in 1900 the Central London Railway opened its deep-level tube railway, electric locomotives hauled carriages.Template:Sfn

In 1900 the Metropolitan Railway and the District Railway ran an experimental EMU in passenger service for six months. A four-rail system was used, two rails outside the running rails providing the traction current at 500–550 V DC. Only the traction motors in the leading motor car were used, the trailing motor coasting.Template:Sfn In 1901 a Metropolitan and District joint electrification committee recommended a three-phase AC system with overhead wires. Initially this was accepted by both parties,Template:Sfn but the District needed to raise finance and found an investor in 1901, the American Charles Yerkes. Yerkes soon had control of the DistrictTemplate:Sfn and his experiences in the United States led him to favour DC with a track level conductor rail pickup similar to that in use on the City & South London Railway and Central London Railway. After arbitration by the Board of Trade the DC system was taken up.Template:Sfn

Low voltage multiple controlEdit

In 1897 Frank J. Sprague demonstrated a system where a low-voltage control signal from any driving position controlled all the motors on a train, developed for the South Side Elevated Railroad in Chicago.Template:Sfn This electro-magnetic system was developed in Britain by British Thomson-Houston (BTH) and first used in Europe in 1902 on the Central London Railway when it changed over to EMU operation to solve a design problem with its locomotives.Template:SfnTemplate:Sfn Westinghouse Electrical developed an electro-pneumatic multiple unit system that used a lower control currentTemplate:Sfn and when in 1903 the District opened its line from Acton Town to South Harrow with experimental EMUs these used control systems from BTH and Westinghouse. After these trials the District selected BTH equipment for its B Stock.Template:Sfn

File:Mersey Railway (All About Railways, Hartnell).jpg

The underground Mersey Railway started an electric service on 3 May 1903, electrified by British Westinghouse Electric with equipment from the US.Template:Sfn A four-rail DC system was installed, with a positive outer rail and a negative return rail between the running rails.Template:Sfn

In London the Great Northern & City Railway was a Template:Convert underground line from Moorgate to Finsbury Park. EMUs with BTH electrical equipment were used from the opening on 14 February 1904; these picked up traction current from conductor rails both sides of the running rails.Template:Sfn

When the Lancashire and Yorkshire Railway (L&YR) was considering electrification of its Liverpool suburban railways, concerns were being expressed, especially in the railway press, that engineering developments in Britain were being overtaken by electrification projects in America and Switzerland. The Preston-based Dick, Kerr & Co. was made responsible for the traction systems and the L&YR built the rolling stock.[2] A 625 V DC four-rail system was adopted, the live rail outside the running rails[2] with a return rail, cross-bonded to the running rails, between them.[3] The two driving motor cars each powered by four 150 hp (110 kW) motors directly controlled from a driving cab at either end of the train. Electric services started between Liverpool Exchange and Southport on 22 March 1904.[2]

The North Eastern Railway (NER) began using EMUs between New Bridge Street and Benton on 29 March 1904 and from 25 July 1904 over a circular route between Newcastle Central and Tynemouth, electrified with a third rail at 600 V DC.[4] The EMUs, with BTH electrical equipment, were built at the NER Carriage Works at York with clerestory roofs.[4]

The Metropolitan Railway began its electric services from Uxbridge to Baker Street in 1905 with EMUs using Westinghouse electric equipment; these ran off-peak as three-car units with a motor car and a driving trailer. Twenty trains with BTH equipment were ordered for the Hammersmith & City line, jointly operated by the Great Western Railway and the Met.Template:Sfn From June 1905 to the end of 1905 EMUs replaced steam on all District services.Template:Sfn In 1906-07 three deep-level tube railways opened: the Charing Cross, Euston and Hampstead Railway, Great Northern, Piccadilly and Brompton Railway and Baker Street and Waterloo Railway, all subsidiary companies of the Underground Electric Railways Company of London. The trains were built by different manufacturers to a similar design. Accommodation in open saloons was accessed by end platforms protected by lattice gates and power was collected from a 550-600 V DC four-rail system and controlled with BTH equipment.Template:Sfn

Early overhead AC electrificationEdit

File:Elevated Electric Train at Wandsworth c 1909.jpg

In 1908 the Midland Railway introduced EMUs that used overhead line energised at 6.7 kV 25 Hz AC.Template:Sfn From 1909 the London, Brighton and South Coast Railway (LB&SCR) also used overhead line at 6.7 kV 25 Hz.Template:Sfn The first section to be electrified was the South London Line connecting London Bridge with Victoria via Denmark Hill, opened on 1 December 1909. The service was marketed as 'The Elevated Electric' and was an immediate success.Template:Sfn By 1921 most of the inner London suburban lines were electrified and services to Coulsdon and Sutton opened on 1 April 1925.Template:Sfn

The LB&SCR built three types of stock were built. The initial South London (SL) stock was introduced as three-car trains, but after 1910 the first class trailers were removed and subsequently ran in 2, 4 or 6-car formations. In 1910 the CP stock was built for the Crystal Palace route; these normally ran as 3-car units. The later five-car CW stock had motors fitted in driving motor luggage vans, passenger accommodation being in trailer cars.[5]

From 1913 to 1916, the L&YR operated an experimental electric service in the Manchester area between Bury and Holcombe Brook. The equipment was provided by Dick, Kerr & Co., which was developing its products for overseas sales. The system used was 3.5 kV DC overhead and two two-car units were built.Template:Sfn After these trials, the L&YR electrified the Manchester to Bury line using 1200 V DC with four rails.[note 2] This opened in 1916 and in 1918 the branch to Holcombe Brook was converted to the same system.Template:Sfn

In 1907 the London & North Western Railway (L&NWR) obtained permission for a pair of extra tracks for suburban services beside its main line from Euston to Watford. Connection with the Bakerloo line at Queen's Park was planned with through running of Bakerloo line trains, so the new tracks were electrified using the 630 V DC four-rail system used on the Bakerloo. Delayed by the World War I, the first electric service ran in 1914 from Earl's Court to Willesden Junction,[6] using borrowed District Railway trains.Template:Sfn The L&NWR began running electric services from Broad Street to Watford in 1917 and from Euston in 1922. The first trains used electrical equipment from Siemens in Germany, but the following ones used Swiss Oerlikon equipment. The EMUs were three cars, formed from a driving motor car, trailer and a driving trailer.[6]

From 1915 the London and South Western Railway introduced EMUs on suburban routes using a 660 V DC third-rail system.Template:Sfn Using converted steam-hauled carriages, three-car units ran with a trailer between two driving motor cars with Westinghouse electrical equipment. After 1920 two-car trailer sets were used between these units to lengthen peak services to eight cars.[7]

In 1921 new trains were introduced on the Underground's Piccadilly line with air-operated sliding doors.Template:Sfn Between 1923 and 1934 Standard stock with air-operated doors replaced gate stock on London's deep-level tube railways, improving access to the cars so reducing boarding times.Template:Sfn


In 1923 the main-line railways in Britain were grouped into four companies. South of London the Southern Railway took over Template:Fract route miles (Template:Convert) of railway electrified with overhead line at 6.7 kV, 57 route miles (Template:Convert) with a third rail at 660 V DC, and the Template:Convert long underground Waterloo & City Railway.Template:Sfn The route mileage of third rail electrification was to more than double in 1925 with routes to Guildford, Dorking and Effingham and from Victoria and Holborn Viaduct to Orpington via Herne Hill and the Catford Loop.Template:Sfn In 1926 EMUs started to run on the South Eastern Main Line route to Orpington and the three lines to Dartford using the third rail system.Template:Sfn In 1926 the Southern announced that the DC system was to replace the LB&SCR AC system,Template:Sfn the last AC train running on 29 September 1929.Template:Sfn Including the London Bridge to East Croydon route electrified in 1928, by the end of 1929 the Southern operated over Template:Fract route miles (Template:Convert) of third rail electrified track and in that year ran 17.8 million electric train miles.Template:Sfn

File:4-lav emu.jpg

For its suburban railways the Southern continued the L&SWR practice of running a three-car EMU off-peak and an unpowered two-car trailer between two three-car units during peak hours. Most of the EMUs were re-built by the Southern from locomotive-hauled stock, mounted on new underframes and fitted with Westinghouse electrical equipment.Template:Sfn In the 1930s electrication was extended to main lines, from Brighton to London Victoria and London Bridge on 1 January 1933.Template:Sfn} For semi-fast services the 4Lav was designed; one composite coach had two toilets, one for first class and another for second class.Template:Sfn For fast services six-car units were developed with a Pullman car or pantry in the set; three units had three first class trailers as well as the Pullman car for peak London Bridge services.Template:Sfn The Brighton Belle was an all-Pullman EMU, providing 'at seat' meal service during the journey between London and Brighton.Template:Sfn

In 1937 electric services began on the direct route to Portsmouth from Waterloo; the 4Cor was developed for this route. As well as gangways within units, there were connections between units. These run with the similar 4Res units that had a restaurant car.Template:Sfn On suburban services the lack of a driving position in the unpowered trailer was proving inflexible and in the early 1940s a four-car unit was built. Classified 4Sub, the three-car units were gradually re-built into four-car units by adding a trailer, and new four-car units were built from 1944 onwards.Template:Sfn

In 1927 a Railway Electrification Committee chaired by Sir John Pringle looked at railway electrification and recommended either 750 V DC third rail or 1500 V DC overhead line.Template:Sfn The Standardisation of Electrification Order 1932 set these systems, allowing 3000 V DC overhead line in exceptional conditions. Work was started by the LNER electrifying the Liverpool Street to Shenfield and Wath and Sheffield to Manchester routes at 1500V DC overhead line, but World War II suspended work.Template:Sfn On 11 May 1931, the LMS and LNER jointly opened the Manchester, South Junction and Altrincham Railway with an 1500 V DC overhead system, with Altrincham Electrics EMUs, three-car all-compartment trains with carriages similar to suburban LMS stock.Template:Sfn

In London, the formation of the London Passenger Transport Board in 1933 was followed by the 1935–40 New Works Programme. For sub-surface lines this involved an investment in rolling stock. For the new Metropolitan line the T Stock standardised the newer compartment stock Metropolitan EMUs; older wooden-bodied stock, with hand operated sliding doors, was replaced by new O Stock and P Stock. These had air-operated sliding doors and used a new Metadyne control system and electric braking.Template:Sfn In 1938 Q Stock was built by replacing the District line EMU wooden trailers with new steel ones and equipping the trains with air-operated sliding doors and electro-pneumatic brakes.Template:Sfn Also in 1938 the tube standard stock was replaced by 1,121 new cars of 1938 Stock with the control equipment under the car floor, thus giving 14% more capacity.Template:Sfn

Outside London and the Southeast, in 1935, the cable system that had been used on the Glasgow Subway since 1896 was changed to an electric system with a third rail at 600 V DC.[8] In 1938 the Wirral Railway was electrified with a third rail DC system to allow through running on the independent Mersey Railway, and EMUs were introduced with air-operated sliding doors.Template:Sfn Similar EMUs replaced older ones on the Liverpool to Southport route from 1940 to 1943.Template:Sfn In 1938 the Tyneside Electrics third rail DC system was extended to South Shields and new EMUs were bought to allow for service expansion.Template:Sfn


Post war reconstructionEdit

File:Colchester Shenfield Set EMU Class 306 306010.jpg

The railways were placed under government control two days before war was declared on 3 September 1939.Template:Sfn After the war, the railways were in a poor financial state with a backlog of maintenance.Template:Sfn Government control was not relinquished before the 1947 Transport Act nationalised most railways and control passed to the Railway Executive of the British Transport Commission.Template:Sfn Some pre-war capital investment schemes that had stopped upon the outbreak of hostilities were restarted, such as 1500 V DC electrification of the Manchester–Sheffield–Wath route and the Great Eastern suburban railways.Template:Citation needed The London to Shenfield route opened in 1949 with three-car EMUs with air-operated doors that collected traction current with a single diamond-shaped pantograph.Template:SfnTemplate:Citation needed Similar EMUs entered service on the Manchester end of the Manchester–Sheffield–Wath route in 1954.Template:Sfn In 1954 compartment stock with slam doors was introduced on the London to Southend route.Template:Sfn

In 1948 a further report into electrification was commissioned, and this repeated the recommendations of the 1932 report for third rail at 750 V DC in Southern England and overhead line at 1500 V DC elsewhere. However, an experiment was authorised in AC overhead line at 6.6 kV 50 Hz on the Lancaster–Morecombe–Heysham line. By 1954 similar experiments had been carried out in France on the Aix-les-Bains line at 25 kV 50 Hz, and both were considered a success.Template:Sfn The report concluded that future electrification should be done with overhead line at 25 kV 50 Hz, except for the Southern Region as there was extensive third rail electrification already in place.Template:Sfn The Manchester and Crewe line was to be the first to be electrified at 25 kV 50 Hz.Template:Sfn Existing overhead line at 1500 V DC was to be converted to 6.6 kV 50 Hz.Template:Sfn

When electrification was installed, the lower voltage was 6.25 kV. Class 304 EMUs were introduced on the Crewe to Manchester route; similar Class 305 EMUs were built for the Great Eastern main line.Template:Sfn The Class 504 1200 V DC units, replacing the older units on the Manchester–Bury line, looked similar.Template:Sfn The 1500 V DC units operating out of Liverpool Street were converted to AC operation in 1959-60.Template:Sfn In 1961 Class 308 were introduced on the London–Tilbury line and in the following year the Class 309 became the first Template:Convert EMU on BR, introduced on the route to Clacton.Template:SfnTemplate:Sfn

After World War II, to replace hand-operated sliding doors on the London Underground, unpainted aluminium R Stock reused the newer Q Stock trailers purchased before the war.Template:Sfn New pneumatic camshaft mechanism (PCM) control equipment and motors were fitted and the sets formed with new trailers.Template:Sfn When, in the 1950s the Metadyne equipment on the O and P Stock became unreliable and needed replacement, PCM control equipment was used and the modified motor car became known as CO and CP stock respectively; trailers were classified COP Stock.Template:Sfn For the deep-level tubes the unpainted aluminium 1959 stock was developed to replace pre-war designs, and entered service on the Piccadilly Line and later on the Central.Template:Sfn

In the Southern Region, the first 4Epb was built at Eastleigh works in 1950 with electro-pneumatic brakes and automatic buckeye couplers.[note 3] Accommodation was in saloons and compartmentsTemplate:Sfn with slam doors at every seat position.Template:Citation needed Bulleid-bodied production switched to the standard BR Mark 1 body in 1954 when two-car units were built to lengthen trains to ten cars on Kent suburban routes.Template:Sfn In 1957 the three-car Class 501, similar to the 4-EPB, was introduced on the LMS lines in north London, replacing the LNWR units.Template:Sfn

1955 Modernisation PlanEdit

File:Margate station - - 570980.jpg

Included in the 1955 Modernisation Plan was the electrification of the SR Kent coast lines. The Tonbridge to Hastings line was excluded because of the restricted loading gauge; the Ashford to Ore line was included in the plan but not electrified.[9] The lines were electrified at 750 V DC and Class 411 stock was built; some units contained a buffet car. These four-car units were similar to the 4Cor units, but using the standard Mark 1 coach design with EPB brakes and an electro-pneumatic camshaft traction control system. The two motor cars each had a pair of 250 hp motors. There were gangways within and between units.Template:Sfn[9] Class 414 – two-car compartment stock with a lavatory for second class in one of the cars and another for first class – was built for stopping services.Template:Sfn For boat trains MLV motor luggage vans were built with two 250 hp motors, designed to work in multiple with Class 411. Powered from their batteries, they were able to work short distances on non-electrified sections.[9]

In the mid-1960s, to replace the ageing Southern Railway mainline units, four-car Class 421 and Class 423 EMUs were built. These had similar traction equipment and bodies and could work in multiple with Class 414 and Class 411 units, although there was one motor car with four motors. Class 423s were semi-fast stock, with high density 3+2 seating and a door to each seating bay; Class 421s were the express units with doors at the ends and middle. Some express units had buffet cars.Template:Sfn[10]

In 1967 the Southern Region wished to replace steam trains to Weymouth with through carriages but could not justify electrification beyond Bournemouth. Class 432 4REP was a high-power unit: between London and Bournemouth it was attached to one or two Class 438 4TC trailer units with driving cabs. At Bournemouth the 4REP was detached and a British Rail Class 33 locomotive adapted for push-pull working was attached at the front. This hauled the trailer units to Weymouth and pushed them back.Template:Sfn

In 1965 the railway on the Isle of Wight needed replacement rolling stock, but it had a restricted loading gauge. At the time, London Transport had some surplus standard tube stock and British Railways bought 55 cars. At first it was intended to fit bus engines, but the line was electrified with the 3rd rail DC system and the cars overhauled and formed into three- and four-car units. These ran from 1967 until replaced in 1989-90 with 1938 tube stock, formed into two-car units.Template:Sfn

A small number of EMUs were designed around the Mark 2 coach. In 1966 the Class 310 AM10) began operating on commuter services from London Euston and in the West Midlands.Template:Sfn The Class 312s were similar units introduced in the mid-1970s.Template:Sfn

In the early 1960s, the extension of electrification of the Metropolitan line to Amersham saw the introduction of four-car A Stock sub-surface stock. They had PCM control equipment; trains were normally eight cars, formed of two units.Template:Sfn These replaced F and T Stock and locomotive-hauled stock.Template:Sfn In the early 1970s, six-car C Stock was introduced on the Hammersmith & City and Circle lines, and, in the late 1970s, six-car D Stock and another batch of C Stock replaced Q, CO and CP stock.Template:Sfn The deep-level Victoria line was built and with 1967 Stock introduced automatic operation in 1968.Template:Sfn The Jubilee line opened in 1979Template:Sfn with 1972 tube stock.Template:Sfn One person operation (OPO) was introduced over the London Underground after agreement was reached with the unions with the Hammersmith & City line in 1984: on the Central and Northern lines this required new trains, delivered in the 1990s.Template:Sfn

In the late 1960s, British Railways adopted the Total Operations Processing System (TOPS) to manage its rolling stock. EMUs were given six-digit unit numbers, the first three digits representing the class and the last three being a unique identifier. AC EMU class numbers begin with a '3', Southern Region 3rd rail DC EMUs with a '4' and other DC EMUs with a '5'.Template:Citation needed

In the late 1960s, the need for a new EMU design was recognised. Prototypes of the British Rail New Generation, 1972 or PEP design were built and placed in passenger service in 1971. Constructed from aluminium, with all vehicles powered and employing rheostatic braking,Template:Sfn the production units were built by BREL at York Works with two sets of air-operated doors on the sides of the car and fully automatic tightlock couplers.Template:Sfn The first units were the dual voltage Class 313 built between February 1976 and April 1977 for the routes out of Moorgate via Finsbury Park.Template:Sfn Class 507 DC units were built in two batches from 1978 to 1980 and the similar Class 508 units in 1979-80. Some of these were transferred to Merseyrail after use on the Southern Region.Template:Sfn AC units also followed: Class 314 in 1979 and Class 315 from 1980 to 1981.Template:Sfn In the mid-1990s, new trains, which featured regenerative braking and allowed the withdrawal of guards, were introduced on London Underground's Northern and Jubilee lines.[11][12]

Mark 3 coach designEdit

File:BBC South Today at London Waterloo.jpg

Other units were based on the all-steel Mark 3 coach design. Most are 20 m long, with two pairs of air-operated doors on each side of the coaches, built at BREL York. The first to be introduced were the AC Class 317, built in two batches from 1981–82 and 1985-87 with thyristor control systems.Template:Sfn The DC Class 455 for inner-suburban duties in South London were built in the early and mid-1980s with recovered traction motors and equipment.Template:Sfn The Class 318 were built by BREL for Scotland in 1985–86.Template:Sfn The Thameslink route across London needed dual-voltage units that could change from AC to DC at Farringdon. Class 319 was built in two batches in 1987–88 and 1990 with gate turn-off thyristor control systems.Template:Sfn Class 442 was built in 1988 for the DC South Western Main Line from London Waterloo to Southampton, Bournemouth, Poole and Weymouth. These 23 m long five-car units have air-operated plug doors at the vehicle ends and air-conditioning. Twenty-four were built in 1988-89 by BREL at its Derby works, using traction equipment from the 4Reps they replaced.Template:Sfn The AC Class 321 was built in three batches in 1988–91 by BREL, with Class 322 and the 3-car Class 320.Template:Sfn The 2-car DC Class 456 was built by BREL at York Works from 1990-91 to work with the Class 455s.Template:Sfn

In 1979 testing started on the West Coast Main Line of the Advanced Passenger Train (APT), formed of two Class 370 units composed of a driving trailer, five trailers and a power car. To increase speed the car bodies tilted, but problems meant the trains were withdrawn. The tilt technology was used twenty years later in Class 390 Pendolinos on the same route.Template:Sfn

In the 1980s, prototype tube train designs were trialled in order to generate feedback about future developments. These led to the 1992 tube stock that replaced the ageing 1959/62 stock on the Central line.Template:Sfn The extension of the Jubilee line saw the introduction of the externally similar 1996 tube stock; refurbishment of the 1983 stock was been considered, but building new trains cost about the same.Template:Sfn

In 1980 the Tyne and Wear Metro opened over the Tyneside Electrics route, diverted through tunnels on parts of the line. New trains were introduced based on German Stadtbahnwagen B light rail units and power was taken from an overhead line at 1500 V DC.[13] In London the automatic Docklands Light Railway opened in 1987; trains are staffed by a train captain who can drive the train in abnormal situations.Template:Sfn

In the 1980s and 1990s Network South East developed Networker trains with micro-processor controlled three-phase AC traction motors on half the axles. The build of the first Class 465 units was split between the newly privatised BREL and GEC-Alstholm.Template:Sfn

Eurostar trains were ordered in 1989 to run from London to Paris and Brussels through the Channel Tunnel, then being built. They were designed to run over the DC electrified southern British network, through the AC electrified Channel Tunnel, on the French high-speed railway network (LGV Nord) at Template:Convert and Belgium railways. Similar to the French TGV but built the British loading gauge, the trains are 20 coaches longTemplate:Sfn with two power cars, and the bogie on the passenger cars next to the power cars motored.Template:Sfn The trains entered service in 1994.Template:Sfn


Train manufacturer BREL was privatised in 1989,[14] and between 1994 and 1997 the rest of British Rail was privatised.[15] Ownership of the track and infrastructure passed to Railtrack on 1 April 1994; afterwards passenger operations were franchised to individual private-sector operators and the freight services sold outright.[16] Rolling stock is owned by ROSCOs and leased to the train operators; competitive tenders are invited from manufacturers for new trains. To ensure flexibity with leasing arrangements electric multiple units are specified to be able to be modified to run on both the 25 kV AC and 750 V DC systems.Template:Sfn Most DC units do not have the transformers and pantographs fitted, but some (such as the Class 377) have sub-classes that operate on routes requiring a switch between AC and DC operation en route.Template:Sfn

File:Southern 377 at Hemel Hempstead.JPG

The first Bombardier Electrostar units were the AC Class 357, built in 1999–2001 for c2cTemplate:SfnTemplate:Sfn and these were followed by the DC Class 375 built in 2001-04 for Connex South Eastern and Connex South Central.Template:SfnTemplate:Sfn In 1999 the UK Health and Safety Executive issued safety regulation requiring the withdrawal all rolling stock without override protection by 1 January 2003 and with slam doors by 1 January 2005. Mark 1 coaches and multiple units based on the design did not comply with either requirement and needed replacement or modification.[17] However, Connex lost both franchises, and when Govia took over the South Central franchise as Southern they modified their specification and their units became Class 377, although the only major difference today is the Southern units have a camera on the side of every car linked to screens in the driver's cab.Template:Sfn Introduction was protracted on both routes with problems such as cab and control equipment so the HSE extended the use of Mark 1 based rolling stock until 31 December 2004 with the proviso: "... that any Mark 1 rolling stock operated by the TOCs after 31 March 2003 must form part of a train fully fitted with a train protection system."[17]Template:Sfn It was 2005 before all units and entered service.Template:Sfn To increase Southeastern suburban stock the DC Class 376 was delivered in 2004-05.Template:Sfn Dual voltage Class 378 units were delivered for London Overground from 2007;Template:Sfn the AC Class 379 for National Express East Anglia and some more 5-car Class 377s are on order for Southern.[18]

To improve services and replace some of the older trains in 1998 South West Trains ordered 30 four-car Juniper Class 458 DC units;Template:Sfn in 1999 similar Class 334 3-car AC units started run in Scotland.Template:Sfn The DC units were assembled with 8-car Class 460 units ordered to replace Gatwick Express push-pull trains.Template:Sfn The Juniper units had a protracted entry into service; the Class 458 units had poor reliability so it was 2004 before all units were in service, and plans were made in 2005 to withdraw the units from service, although reliability has since improved.Template:Sfn Template:As of for operational reasons the Class 460 units have been withdrawn and it planned the coaches will be used to extend the Class 458 to 5-car units.[19]

In 2000 Siemens Transportation supplied Class 332 for Heathrow Express in 1998 and the similar Class 333 for West Yorkshire PTE.Template:Sfn When South West Trains needed to replace its Mark 1 stock in 2001, after the problems with the Juniper Class 458 units, the units chosen were the Desiro UK range. The 23 m Class 444 was introduced to Portsmouth and Bournemouth and Class 450 for the outer suburban services.Template:Sfn AC versions have entered service: Class 350 for stopping services on the West Coast Main Line and Class 360 for outer suburban Liverpool Street services.Template:Sfn Similar Class 380 3 and 4-car AC units were built for the Strathclyde area in 2009–10.Template:Sfn

File:S stock interior.jpg

From 2000 to 2005 Virgin Trains modernised the West Coast Main Line with Alstom's Class 390 Template:Convert capable 9-car units. These use the tilt technology developed twenty years previously by the APT project. These units were designed for speeds of Template:Convert, however speeds over 125 mph require in-cab signalling and this has not been installed.Template:Sfn Template:As of some units are being lengthened to 11 cars, doubling the standard class seats.[20]

In December 2003 approval was given to run domestic services on the planned Channel Tunnel Rail Link (CTRL) (now High Speed 1) from Kent.[21] In October 2004 Hitachi was announced to be the preferred bidder to supply high speed trains for these services.[22] Preview services began in June 2009,[23] a full regular service starting on 13 December 2009.[24] The Class 395 6-car trains are dual voltage, capable of running on High Speed 1 at Template:Convert and on the classic DC lines at Template:Convert.[25]

In 2011 new trains were introduced on London Underground's Victoria line with IGBT driven AC asynchronous electric motors and regenerative braking.[26] Template:As of S Stock is being introduced on London Underground sub-surface lines in 8-car sets for the Metropolitan line and 7-car sets for the Circle, District and City and Hammersmith lines. Also with IGBT driven AC asynchronous electric motors and regenerative braking these units have every axle motored and are capable of running from 750 V DC. The first air-conditioned London Underground units there is a wide gangway the length of the train. It is planned that an automatic train operation system will be installed in 2018.[27]

Planned trainsEdit

Template:As of two thirds of passenger carriages on Network Rail are in EMUs.Template:Sfn Of these 32% are capable of 75 mph, 62% 90 or 100 mph and the remaining 7% 125 mph. The most common length is four cars, but they vary from two to 11 cars.Template:Sfn Cars are 20 m or 23 m long.Template:Sfn Seating capacity depends on the intended use; inner suburban units have lower number of seats giving more room for standing passengers, especially around the doors, and easier access, whereas an interurban high speed train would have comfortable seats.Template:Sfn

Template:As of a quarter of the railway track in Great Britain is electrified with overhead line and 14% with third rail.Template:Sfn Third rail electrification is increasingly seen as outdated and inefficient,Template:Sfn although the rolling stock can be cheaper and the clearances needed reduced.Template:Sfn Overhead electrification at 25 kV 50 Hz is cheaper to install and operate, more energy efficient, operates better after snowfall and allows more power to be delivered to the train.Template:Sfn An economic case can be made for replacing DC electrification with AC when the trackside equipment reaches the end of its lifeTemplate:Sfn as long as the rolling stock is capable of conversionTemplate:Sfn and costly infrastructure works are not needed.Template:Sfn Some lines, such as the Merseyrail tunnels in Liverpool and the Thames Tunnel in the East London Railway may not be suitable for conversion.Template:Sfn As London's suburban trains such the Networker and the Class 455 are not suitable are conversion but the outer-suburban Desiro and Electrostar are, conversion of the outer suburban lines with trains changing mode en route is considered the best option.Template:Sfn The third rail electrification between Basingstoke and Weymouth needs renewal in the next ten years.Template:Sfn In the 2012 High Level Output Specification the Department of Transport asked the rail industry to present plans to convert the line from Basingstoke to Southampton Docks by 2019 as part of a new electrified route from North to South and as a pilot conversion project.Template:Sfn

On order, to be delivered by 2015, are 20 Class 350s for London Midland, with ten are to be transferred to Transpennine Express for Manchester Airport to Scotland services. Southern is buying 34 5-car Class 377s, 26 to lengthen services in south London and 8 dual voltage.[28] Eurostar have ten Siemens Eurostar_e320 sets on order due by the end of 2014.[29] To provide new trains for the Thameslink Programme, a consortium including Siemens Project Ventures GmbH, is named preferred bidder and entry into service is currently scheduled from 2015 to 2018.[30] Similar Crossrail electric multiple units, given TOPS Class 345, are planned to enter service in 2018.[31] For Intercity Express Programme bi-mode trains are planned to enter service on the Great Western main line from 2017, after electrification of the Great Western Main Line. Further trains on the East Coast route to Scotland are due from 2018.[32] A 2013 long term rolling stock strategy considered that because of the planned electrification programme, predicted growth in rail travel and the need to replace vehicles as they reach the end of their lives, 13,000–19,000 electric carriages will need to be built by 2043.[33]

Notes and ReferencesEdit


  1. A train was made from two units classified as TOPS Class 370 AC EMUs.
  2. Like the Liverpool electrification the fourth rail was bonded to the running rails and later removed.Template:Sfn
  3. Only the mechanical coupling was automatic: the brakes and control systems still had to be manually connected.Template:Sfn


  1. 1.0 1.1 Script error
  2. 2.0 2.1 2.2 Script error
  3. Script error
  4. 4.0 4.1 Script error
  5. Script error
  6. 6.0 6.1 Script error
  7. Script error
  8. Script error
  9. 9.0 9.1 9.2 Script error
  10. Script error
  11. Script error
  12. Script error
  13. Script error
  14. Script error
  15. Script error
  16. Script error
  17. 17.0 17.1 Script error
  18. Script error
  19. Template:Cite press release
  20. Template:Cite press release
  21. Script error
  22. Script error
  23. Template:Cite press release
  24. Script error
  25. Script error
  26. Script error
  27. Script error
  28. Template:Cite journal
  29. Script error
  30. Script error
  31. Script error
  32. Script error
  33. Script error


External linksEdit

Template:Commons category

Template:British Rail EMU

Community content is available under CC-BY-SA unless otherwise noted.