FANDOM


The atom is a basic unit of matter that consists of a dense central nucleus surrounded by a cloud of negatively charged electrons. The atomic nucleus contains a mix of positively charged protons and electrically neutral neutrons (except in the case of hydrogen-1, which is the only stable nuclide with no neutrons). The electrons of an atom are bound to the nucleus by the electromagnetic force. Likewise, a group of atoms can remain bound to each other by chemical bonds based on the same force, forming a molecule. An atom containing an equal number of protons and electrons is electrically neutral, otherwise it is positively or negatively charged and is known as an ion. An atom is classified according to the number of protons and neutrons in its nucleus: the number of protons determines the chemical element, and the number of neutrons determines the isotope of the element.[1]

Chemical atoms, which in science now carry the simple name of "atom," are minuscule objects with diameters of a few tenths of a nanometer and tiny masses proportional to the volume implied by these dimensions. Atoms can only be observed individually using special instruments such as the scanning tunneling microscope. Over 99.94% of an atom's mass is concentrated in the nucleus,[note 1] with protons and neutrons having roughly equal mass. Each element has at least one isotope with an unstable nucleus that can undergo radioactive decay. This can result in a transmutation that changes the number of protons or neutrons in a nucleus.[2] Electrons that are bound to atoms possess a set of stable energy levels, or orbitals, and can undergo transitions between them by absorbing or emitting photons that match the energy differences between the levels. The electrons determine the chemical properties of an element, and strongly influence an atom's magnetic properties. The principles of quantum mechanics have been successfully used to model the observed properties of the atom.

EtymologyEdit

The name atom comes from the Greek ἄτομος (atomos, "indivisible") from ἀ- (a-, "not") and τέμνω (temnō, "I cut"),[3] which means uncuttable, or indivisible, something that cannot be divided further.[4] The concept of an atom as an indivisible component of matter was first proposed by early Indian and Greek philosophers. In the 18th and 19th centuries, chemists provided a physical basis for this idea by showing that certain substances could not be further broken down by chemical methods, and they applied the ancient philosophical name of atom to the chemical entity. During the late 19th and early 20th centuries, physicists discovered subatomic components and structure inside the atom, thereby demonstrating that the chemical "atom" was divisible and that the name might not be appropriate.[5]Template:Sfn However, it was retained. This has led to some debate about whether the ancient philosophers, who intended to refer to fundamental individual objects with their concept of "atoms," were referring to modern chemical atoms, or something more like indivisible subatomic particles such as leptons or quarks, or even some more fundamental particle that has yet to be discovered.[6]

History of atomic theoryEdit

Main article: Atomic theory

AtomismEdit

Main article: Atomism

The concept that matter is composed of discrete units and cannot be divided into arbitrarily tiny quantities has been around for millennia, but these ideas were founded in abstract, philosophical reasoning rather than experimentation and empirical observation. The nature of atoms in philosophy varied considerably over time and between cultures and schools, and often had spiritual elements. Nevertheless, the basic idea of the atom was adopted by scientists thousands of years later because it elegantly explained new discoveries in the field of chemistry.Template:Sfn The ancient name of "atom" from atomism had already been nearly universally used to describe chemical atoms by that time, and it was therefore retained as a term, long after chemical atoms were found to be divisible, and even after smaller, truly indivisible particles were identified.

References to the concept of atoms date back to ancient Greece and India. In India, the Ājīvika, Jain, and Cārvāka schools of atomism may date back to the 6th century BCE.Template:Sfn The Nyaya and Vaisheshika schools later developed theories on how atoms combined into more complex objects.Template:Sfn In the West, the references to atoms emerged in the 5th century BCE with Leucippus, whose student, Democritus, systematized his views. In approximately 450 BCE, Democritus coined the term átomos (Template:Lang-el), which means "uncuttable" or "the smallest indivisible particle of matter". Although the Indian and Greek concepts of the atom were based purely on philosophy, modern science has retained the name coined by Democritus.Template:Sfn

Corpuscularianism is the postulate, expounded in the 13th-century by the alchemist Pseudo-Geber (Geber),Template:Sfn sometimes identified with Paul of Taranto, that all physical bodies possess an inner and outer layer of minute particles or corpuscles.Template:Sfn Corpuscularianism is similar to the theory of atomism, except that where atoms were supposed to be indivisible, corpuscles could in principle be divided. In this manner, for example, it was theorized that mercury could penetrate into metals and modify their inner structure.[7] Corpuscularianism stayed a dominant theory over the next several hundred years.

In 1661, natural philosopher Robert Boyle published The Sceptical Chymist in which he argued that matter was composed of various combinations of different "corpuscules" or atoms, rather than the classical elements of air, earth, fire and water.Template:Sfn During the 1670s corpuscularianism was used by Isaac Newton in his development of the corpuscular theory of light.Template:Sfn[8]

Origin of scientific theoryEdit

File:Daltons symbols.gif

Further progress in the understanding of atoms did not occur until the science of chemistry began to develop. In 1789, French nobleman and scientific researcher Antoine Lavoisier discovered the law of conservation of mass and defined an element as a basic substance that could not be further broken down by the methods of chemistry.[9]

In 1805, English instructor and natural philosopher John Dalton used the concept of atoms to explain why elements always react in ratios of small whole numbers (the law of multiple proportions) and why certain gases dissolved better in water than others. He proposed that each element consists of atoms of a single, unique type, and that these atoms can join together to form chemical compounds.Template:SfnTemplate:Sfn Dalton is considered the originator of modern atomic theory.Template:Sfn

Dalton's atomic hypothesis did not specify the size of atoms. Common sense indicated they must be very small, but nobody knew how small. Therefore it was a major landmark when in 1865 Johann Josef Loschmidt measured the size of the molecules that make up air.

An additional line of reasoning in support of particle theory (and by extension atomic theory) began in 1827 when botanist Robert Brown used a microscope to look at dust grains floating in water and discovered that they moved about erratically—a phenomenon that became known as "Brownian motion". J. Desaulx suggested in 1877 that the phenomenon was caused by the thermal motion of water molecules, and in 1905 Albert Einstein produced the first mathematical analysis of the motion.[10]Template:Sfn[11] French physicist Jean Perrin used Einstein's work to experimentally determine the mass and dimensions of atoms, thereby conclusively verifying Dalton's atomic theory.[12]

File:Mendeleev's 1869 periodic table.png

In 1869, building upon earlier discoveries by such scientists as Lavoisier, Dmitri Mendeleev published the first functional periodic table.[13] The table itself is a visual representation of the periodic law, which states that certain chemical properties of elements repeat periodically when arranged by atomic number.Template:Sfn

Subcomponents and quantum theoryEdit

File:Atom diagram.png

The physicist J. J. Thomson, through his work on cathode rays in 1897, discovered the electron, and concluded that they were a component of every atom. Thus he overturned the belief that atoms are the indivisible, ultimate particles of matter.[14] Thomson postulated that the low mass, negatively charged electrons were distributed throughout the atom, possibly rotating in rings, with their charge balanced by the presence of a uniform sea of positive charge. This later became known as the plum pudding model.

In 1909, Hans Geiger and Ernest Marsden, under the direction of physicist Ernest Rutherford, bombarded a sheet of gold foil with alpha rays—by then known to be positively charged helium atoms—and discovered that a small percentage of these particles were deflected through much larger angles than was predicted using Thomson's proposal. Rutherford interpreted the gold foil experiment as suggesting that the positive charge of a heavy gold atom and most of its mass was concentrated in a nucleus at the center of the atom—the Rutherford model.[15]

While experimenting with the products of radioactive decay, in 1913 radiochemist Frederick Soddy discovered that there appeared to be more than one type of atom at each position on the periodic table.[16] The term isotope was coined by Margaret Todd as a suitable name for different atoms that belong to the same element. J.J. Thomson created a technique for separating atom types through his work on ionized gases, which subsequently led to the discovery of stable isotopes.[17]

File:Bohr Model.svg

Meanwhile, in 1913, physicist Niels Bohr suggested that the electrons were confined into clearly defined, quantized orbits, and could jump between these, but could not freely spiral inward or outward in intermediate states.[18] An electron must absorb or emit specific amounts of energy to transition between these fixed orbits. When the light from a heated material was passed through a prism, it produced a multi-colored spectrum. The appearance of fixed lines in this spectrum was successfully explained by these orbital transitions.[19]

Later in the same year Henry Moseley provided additional experimental evidence in favor of Niels Bohr's theory. These results refined Ernest Rutherford's and Antonius Van den Broek's model, which proposed that the atom contains in its nucleus a number of positive nuclear charges that is equal to its (atomic) number in the periodic table. Until these experiments, atomic number was not known to be a physical and experimental quantity. That it is equal to the atomic nuclear charge remains the accepted atomic model today.Template:Sfn

Chemical bonds between atoms were now explained, by Gilbert Newton Lewis in 1916, as the interactions between their constituent electrons.[20] As the chemical properties of the elements were known to largely repeat themselves according to the periodic law,Template:Sfn in 1919 the American chemist Irving Langmuir suggested that this could be explained if the electrons in an atom were connected or clustered in some manner. Groups of electrons were thought to occupy a set of electron shells about the nucleus.[21]

The Stern–Gerlach experiment of 1922 provided further evidence of the quantum nature of the atom. When a beam of silver atoms was passed through a specially shaped magnetic field, the beam was split based on the direction of an atom's angular momentum, or spin. As this direction is random, the beam could be expected to spread into a line. Instead, the beam was split into two parts, depending on whether the atomic spin was oriented up or down.[22]

In 1924, Louis de Broglie proposed that all particles behave to an extent like waves. In 1926, Erwin Schrödinger used this idea to develop a mathematical model of the atom that described the electrons as three-dimensional waveforms rather than point particles. A consequence of using waveforms to describe particles is that it is mathematically impossible to obtain precise values for both the position and momentum of a particle at the same time; this became known as the uncertainty principle, formulated by Werner Heisenberg in 1926. In this concept, for a given accuracy in measuring a position one could only obtain a range of probable values for momentum, and vice versa. This model was able to explain observations of atomic behavior that previous models could not, such as certain structural and spectral patterns of atoms larger than hydrogen. Thus, the planetary model of the atom was discarded in favor of one that described atomic orbital zones around the nucleus where a given electron is most likely to be observed.[23][24]

File:Mass Spectrometer Schematic.svg

The development of the mass spectrometer allowed the exact mass of atoms to be measured. The device uses a magnet to bend the trajectory of a beam of ions, and the amount of deflection is determined by the ratio of an atom's mass to its charge. The chemist Francis William Aston used this instrument to show that isotopes had different masses. The atomic mass of these isotopes varied by integer amounts, called the whole number rule.[25] The explanation for these different isotopes awaited the discovery of the neutron, a neutral-charged particle with a mass similar to the proton, by the physicist James Chadwick in 1932. Isotopes were then explained as elements with the same number of protons, but different numbers of neutrons within the nucleus.[26]

Fission, high-energy physics and condensed matterEdit

In 1938, the German chemist Otto Hahn, a student of Rutherford, directed neutrons onto uranium atoms expecting to get transuranium elements. Instead, his chemical experiments showed barium as a product.[27] A year later, Lise Meitner and her nephew Otto Frisch verified that Hahn's result were the first experimental nuclear fission.[28][29] In 1944, Hahn received the Nobel prize in chemistry. Despite Hahn's efforts, the contributions of Meitner and Frisch were not recognized.[30]

In the 1950s, the development of improved particle accelerators and particle detectors allowed scientists to study the impacts of atoms moving at high energies.[31] Neutrons and protons were found to be hadrons, or composites of smaller particles called quarks. The standard model of particle physics was developed that so far has successfully explained the properties of the nucleus in terms of these sub-atomic particles and the forces that govern their interactions.[32]

Subatomic particlesEdit

Main article: Subatomic particle

Though the word atom originally denoted a particle that cannot be cut into smaller particles, in modern scientific usage the atom is composed of various subatomic particles. The constituent particles of an atom are the electron, the proton and the neutron; all three are fermions. However, the hydrogen-1 atom has no neutrons and the hydron ion has no electrons.

The electron is by far the least massive of these particles at Template:Val, with a negative electrical charge and a size that is too small to be measured using available techniques.Template:Sfn It is the lightest particle with a positive rest mass measured. Under ordinary conditions, electrons are bound to the positively charged nucleus by the attraction created from opposite electric charges. If an atom have more or fewer electrons than its atomic number, then is become respectively negatively or positively charged as a whole; a charged atom is called ion. Electrons are known since the late 19th century, mostly thanks to J.J. Thomson; see history of subatomic physics for details.

Protons have a positive charge and a mass 1,836 times that of the electron, at Template:Val. The number of protons in an atom is called its atomic number. Ernest Rutherford (1919) observed that nitrogen under alpha-particle bombardment ejects what appeared to be hydrogen nuclei. By 1920 he had accepted that the hydrogen nucleus is a distinct particle within the atom and named it proton.

Neutrons have no electrical charge and have a free mass of 1,839 times the mass of the electron,Template:Sfn or Template:Val, the heaviest of the three constituent particles, but it can be reduced by the nuclear binding energy. Neutrons and protons (collectively known as nucleons) have comparable dimensions—on the order of Template:Val—although the 'surface' of these particles is not sharply defined.Template:Sfn The neutron was discovered in 1932 by the English physicist James Chadwick.

In the Standard Model of physics, electrons are truly elementary particles with no internal structure. However, both protons and neutrons are composite particles composed of elementary particles called quarks. There are two types of quarks in atoms, each having a fractional electric charge. Protons are composed of two up quarks (each with charge +Template:Frac) and one down quark (with a charge of −Template:Frac). Neutrons consist of one up quark and two down quarks. This distinction accounts for the difference in mass and charge between the two particles.[33][34]

The quarks are held together by the strong interaction (or strong force), which is mediated by gluons. The protons and neutrons, in turn, are held to each other in the nucleus by the nuclear force, which is a residuum of the strong force that has somewhat different range-properties (see the article on the nuclear force for more). The gluon is a member of the family of gauge bosons, which are elementary particles that mediate physical forces.[33][34]

NucleusEdit

Main article: Atomic nucleus
File:Binding energy curve - common isotopes.svg

All the bound protons and neutrons in an atom make up a tiny atomic nucleus, and are collectively called nucleons. The radius of a nucleus is approximately equal to 1.07 Template:Radic fm, where A is the total number of nucleons.Template:Sfn This is much smaller than the radius of the atom, which is on the order of 105 fm. The nucleons are bound together by a short-ranged attractive potential called the residual strong force. At distances smaller than 2.5 fm this force is much more powerful than the electrostatic force that causes positively charged protons to repel each other.Template:Sfn

Atoms of the same element have the same number of protons, called the atomic number. Within a single element, the number of neutrons may vary, determining the isotope of that element. The total number of protons and neutrons determine the nuclide. The number of neutrons relative to the protons determines the stability of the nucleus, with certain isotopes undergoing radioactive decay.[35]

The proton, the electron, and the neutron are classified as fermions. Fermions obey the Pauli exclusion principle which prohibits identical fermions, such as multiple protons, from occupying the same quantum state at the same time. Thus, every proton in the nucleus must occupy a quantum state different from all other protons, and the same applies to all neutrons of the nucleus and to all electrons of the electron cloud. However, a proton and a neutron are allowed to occupy the same quantum state.[36]

For atoms with low atomic numbers, a nucleus that has more neutrons than protons tends to drop to a lower energy state through radioactive decay so that the neutron-proton ratio is closer to one. However, as the atomic number increases, a higher proportion of neutrons is required to offset the mutual repulsion of the protons. Thus, there are no stable nuclei with equal proton and neutron numbers above atomic number Z = 20 (calcium) and as Z increases, the neutron-proton ratio of stable isotopes increases.[36] The stable isotope with the highest proton-neutron ration is lead-208 (about 1.5).

File:Wpdms physics proton proton chain 1.svg

The number of protons and neutrons in the atomic nucleus can be modified, although this can require very high energies because of the strong force. Nuclear fusion occurs when multiple atomic particles join to form a heavier nucleus, such as through the energetic collision of two nuclei. For example, at the core of the Sun protons require energies of 3–10 keV to overcome their mutual repulsion—the coulomb barrier—and fuse together into a single nucleus.[37] Nuclear fission is the opposite process, causing a nucleus to split into two smaller nuclei—usually through radioactive decay. The nucleus can also be modified through bombardment by high energy subatomic particles or photons. If this modifies the number of protons in a nucleus, the atom changes to a different chemical element.[38][39]

If the mass of the nucleus following a fusion reaction is less than the sum of the masses of the separate particles, then the difference between these two values can be emitted as a type of usable energy (such as a gamma ray, or the kinetic energy of a beta particle), as described by Albert Einstein's mass–energy equivalence formula, E = mc2, where m is the mass loss and c is the speed of light. This deficit is part of the binding energy of the new nucleus, and it is the non-recoverable loss of the energy that causes the fused particles to remain together in a state that requires this energy to separate.Template:Sfn

The fusion of two nuclei that create larger nuclei with lower atomic numbers than iron and nickel—a total nucleon number of about 60—is usually an exothermic process that releases more energy than is required to bring them together.[40] It is this energy-releasing process that makes nuclear fusion in stars a self-sustaining reaction. For heavier nuclei, the binding energy per nucleon in the nucleus begins to decrease. That means fusion processes producing nuclei that have atomic numbers higher than about 26, and atomic masses higher than about 60, is an endothermic process. These more massive nuclei can not undergo an energy-producing fusion reaction that can sustain the hydrostatic equilibrium of a star.[36]

Electron cloudEdit

Main article: Atomic orbital
File:Potential energy well.svg

The electrons in an atom are attracted to the protons in the nucleus by the electromagnetic force. This force binds the electrons inside an electrostatic potential well surrounding the smaller nucleus, which means that an external source of energy is needed for the electron to escape. The closer an electron is to the nucleus, the greater the attractive force. Hence electrons bound near the center of the potential well require more energy to escape than those at greater separations.

Electrons, like other particles, have properties of both a particle and a wave. The electron cloud is a region inside the potential well where each electron forms a type of three-dimensional standing wave—a wave form that does not move relative to the nucleus. This behavior is defined by an atomic orbital, a mathematical function that characterises the probability that an electron appears to be at a particular location when its position is measured.[41] Only a discrete (or quantized) set of these orbitals exist around the nucleus, as other possible wave patterns rapidly decay into a more stable form.[42] Orbitals can have one or more ring or node structures, and they differ from each other in size, shape and orientation.[43]

File:S-p-Orbitals.svg
File:Atomic orbitals and periodic table construction.ogv

Each atomic orbital corresponds to a particular energy level of the electron. The electron can change its state to a higher energy level by absorbing a photon with sufficient energy to boost it into the new quantum state. Likewise, through spontaneous emission, an electron in a higher energy state can drop to a lower energy state while radiating the excess energy as a photon. These characteristic energy values, defined by the differences in the energies of the quantum states, are responsible for atomic spectral lines.[42]

The amount of energy needed to remove or add an electron—the electron binding energy—is far less than the binding energy of nucleons. For example, it requires only 13.6 eV to strip a ground-state electron from a hydrogen atom,[44] compared to 2.23 million eV for splitting a deuterium nucleus.[45] Atoms are electrically neutral if they have an equal number of protons and electrons. Atoms that have either a deficit or a surplus of electrons are called ions. Electrons that are farthest from the nucleus may be transferred to other nearby atoms or shared between atoms. By this mechanism, atoms are able to bond into molecules and other types of chemical compounds like ionic and covalent network crystals.Template:Sfn

PropertiesEdit

Nuclear propertiesEdit

Main article: Isotope

By definition, any two atoms with an identical number of protons in their nuclei belong to the same chemical element. Atoms with equal numbers of protons but a different number of neutrons are different isotopes of the same element. For example, all hydrogen atoms admit exactly one proton, but isotopes exist with no neutrons (hydrogen-1, by far the most common form,[46] also called protium), one neutron (deuterium), two neutrons (tritium) and more than two neutrons. The known elements form a set of atomic numbers, from the single proton element hydrogen up to the 118-proton element ununoctium.[47] All known isotopes of elements with atomic numbers greater than 82 are radioactive.Template:Sfn[48]

About 339 nuclides occur naturally on Earth,[49] of which 254 (about 75%) have not been observed to decay, and are referred to as "stable isotopes". However, only 90 of these nuclides are stable to all decay, even in theory. Another 164 (bringing the total to 254) have not been observed to decay, even though in theory it is energetically possible. These are also formally classified as "stable". An additional 34 radioactive nuclides have half-lives longer than 80 million years, and are long-lived enough to be present from the birth of the solar system. This collection of 288 nuclides are known as primordial nuclides. Finally, an additional 51 short-lived nuclides are known to occur naturally, as daughter products of primordial nuclide decay (such as radium from uranium), or else as products of natural energetic processes on Earth, such as cosmic ray bombardment (for example, carbon-14).[50][note 2]

For 80 of the chemical elements, at least one stable isotope exists. As a rule, there is only a handful of stable isotopes for each of these elements, the average being 3.2 stable isotopes per element. Twenty-six elements have only a single stable isotope, while the largest number of stable isotopes observed for any element is ten, for the element tin. Elements 43, 61, and all elements numbered 83 or higher have no stable isotopes.[51]Template:Page needed

Stability of isotopes is affected by the ratio of protons to neutrons, and also by the presence of certain "magic numbers" of neutrons or protons that represent closed and filled quantum shells. These quantum shells correspond to a set of energy levels within the shell model of the nucleus; filled shells, such as the filled shell of 50 protons for tin, confers unusual stability on the nuclide. Of the 254 known stable nuclides, only four have both an odd number of protons and odd number of neutrons: hydrogen-2 (deuterium), lithium-6, boron-10 and nitrogen-14. Also, only four naturally occurring, radioactive odd-odd nuclides have a half-life over a billion years: potassium-40, vanadium-50, lanthanum-138 and tantalum-180m. Most odd-odd nuclei are highly unstable with respect to beta decay, because the decay products are even-even, and are therefore more strongly bound, due to nuclear pairing effects.[51]Template:Page needed

MassEdit

Main article: Atomic mass

The large majority of an atom's mass comes from the protons and neutrons that make it up. The total number of these particles (called "nucleons") in a given atom is called the mass number. The mass number is a simple whole number, and has units of "nucleons." An example of use of a mass number is "carbon-12," which has 12 nucleons (six protons and six neutrons).

The actual mass of an atom at rest is often expressed using the unified atomic mass unit (u), which is also called a dalton (Da). This unit is defined as a twelfth of the mass of a free neutral atom of carbon-12, which is approximately Template:Val.[52] Hydrogen-1, the lightest isotope of hydrogen and the atom with the lowest mass, has an atomic weight of 1.007825 u.[53] The value of this number is called the atomic mass. A given atom has an atomic mass approximately equal (within 1%) to its mass number times the mass of the atomic mass unit. However, this number will not be an exact whole number except in the case of carbon-12 (see below).[54] The heaviest stable atom is lead-208,Template:Sfn with a mass of Template:Val.[55]

As even the most massive atoms are far too light to work with directly, chemists instead use the unit of moles. One mole of atoms of any element always has the same number of atoms (about [[Avogadro constant|Template:Val]]). This number was chosen so that if an element has an atomic mass of 1 u, a mole of atoms of that element has a mass close to one gram. Because of the definition of the unified atomic mass unit, each carbon-12 atom has an atomic mass of exactly 12 u, and so a mole of carbon-12 atoms weighs exactly 0.012 kg.[52]Template:Page needed

Shape and sizeEdit

Main article: Atomic radius

Atoms lack a well-defined outer boundary, so their dimensions are usually described in terms of an atomic radius. This is a measure of the distance out to which the electron cloud extends from the nucleus.Template:Citation needed However, this assumes the atom to exhibit a spherical shape, which is only obeyed for atoms in vacuum or free space. Atomic radii may be derived from the distances between two nuclei when the two atoms are joined in a chemical bond. The radius varies with the location of an atom on the atomic chart, the type of chemical bond, the number of neighboring atoms (coordination number) and a quantum mechanical property known as spin.[56] On the periodic table of the elements, atom size tends to increase when moving down columns, but decrease when moving across rows (left to right).[57] Consequently, the smallest atom is helium with a radius of 32 pm, while one of the largest is caesium at 225 pm.[58]

When subjected to external fields, like an electrical field, the shape of an atom may deviate from spherical symmetry. The deformation depends on the field magnitude and the orbital type of outer shell electrons, as shown by group-theoretical considerations. Aspherical deviations might be elicited for instance in crystals, where large crystal-electrical fields may occur at low-symmetry lattice sites.[59] Significant ellipsoidal deformations have recently been shown to occur for sulfur ions in pyrite-type compounds.[60]

Atomic dimensions are thousands of times smaller than the wavelengths of light (400–700 nm) so they can not be viewed using an optical microscope. However, individual atoms can be observed using a scanning tunneling microscope. To visualize the minuteness of the atom, consider that a typical human hair is about 1 million carbon atoms in width.[61] A single drop of water contains about 2 sextillion (Template:Val) atoms of oxygen, and twice the number of hydrogen atoms.[62] A single carat diamond with a mass of Template:Val contains about 10 sextillion (1022) atoms of carbon.[note 3] If an apple were magnified to the size of the Earth, then the atoms in the apple would be approximately the size of the original apple.Template:Sfn

Radioactive decayEdit

Main article: Radioactive decay
File:Isotopes and half-life.svg

Every element has one or more isotopes that have unstable nuclei that are subject to radioactive decay, causing the nucleus to emit particles or electromagnetic radiation. Radioactivity can occur when the radius of a nucleus is large compared with the radius of the strong force, which only acts over distances on the order of 1 fm.[63]

The most common forms of radioactive decay are:Template:Sfn[64]

  • Alpha decay: this process is caused when the nucleus emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. The result of the emission is a new element with a lower atomic number.
  • Beta decay (and electron capture): these processes are regulated by the weak force, and result from a transformation of a neutron into a proton, or a proton into a neutron. The neutron to proton transition is accompanied by the emission of an electron and an antineutrino, while proton to neutron transition (except in electron capture) causes the emission of a positron and a neutrino. The electron or positron emissions are called beta particles. Beta decay either increases or decreases the atomic number of the nucleus by one. Electron capture is more common than positron emission, because it requires less energy. In this type of decay, an electron is absorbed by the nucleus, rather than a positron emitted from the nucleus. A neutrino is still emitted in this process, and a proton changes to a neutron.
  • Gamma decay: this process results from a change in the energy level of the nucleus to a lower state, resulting in the emission of electromagnetic radiation. The excited state of a nucleus which results in gamma emission usually occurs following the emission of an alpha or a beta particle. Thus, gamma decay usually follows alpha or beta decay.

Other more rare types of radioactive decay include ejection of neutrons or protons or clusters of nucleons from a nucleus, or more than one beta particle. An analog of gamma emission which allows excited nuclei to lose energy in a different way, is internal conversion— a process that produces high-speed electrons that are not beta rays, followed by production of high-energy photons that are not gamma rays. A few large nuclei explode into two or more charged fragments of varying masses plus several neutrons, in a decay called spontaneous nuclear fission.

Each radioactive isotope has a characteristic decay time period—the half-life—that is determined by the amount of time needed for half of a sample to decay. This is an exponential decay process that steadily decreases the proportion of the remaining isotope by 50% every half-life. Hence after two half-lives have passed only 25% of the isotope is present, and so forth.[63]

Magnetic momentEdit

Main article: Electron magnetic dipole moment

Elementary particles possess an intrinsic quantum mechanical property known as spin. This is analogous to the angular momentum of an object that is spinning around its center of mass, although strictly speaking these particles are believed to be point-like and cannot be said to be rotating. Spin is measured in units of the reduced Planck constant (ħ), with electrons, protons and neutrons all having spin ½ ħ, or "spin-½". In an atom, electrons in motion around the nucleus possess orbital angular momentum in addition to their spin, while the nucleus itself possesses angular momentum due to its nuclear spin.[65]

The magnetic field produced by an atom—its magnetic moment—is determined by these various forms of angular momentum, just as a rotating charged object classically produces a magnetic field. However, the most dominant contribution comes from spin. Due to the nature of electrons to obey the Pauli exclusion principle, in which no two electrons may be found in the same quantum state, bound electrons pair up with each other, with one member of each pair in a spin up state and the other in the opposite, spin down state. Thus these spins cancel each other out, reducing the total magnetic dipole moment to zero in some atoms with even number of electrons.[66]

In ferromagnetic elements such as iron, an odd number of electrons leads to an unpaired electron and a net overall magnetic moment. The orbitals of neighboring atoms overlap and a lower energy state is achieved when the spins of unpaired electrons are aligned with each other, a process known as an exchange interaction. When the magnetic moments of ferromagnetic atoms are lined up, the material can produce a measurable macroscopic field. Paramagnetic materials have atoms with magnetic moments that line up in random directions when no magnetic field is present, but the magnetic moments of the individual atoms line up in the presence of a field.[66][67]

The nucleus of an atom can also have a net spin. Normally these nuclei are aligned in random directions because of thermal equilibrium. However, for certain elements (such as xenon-129) it is possible to polarize a significant proportion of the nuclear spin states so that they are aligned in the same direction—a condition called hyperpolarization. This has important applications in magnetic resonance imaging.[68]Template:Sfn

Energy levelsEdit

File:Atomic orbital energy levels.svg

The potential energy of an electron in an atom is negative, its dependence of its position reaches the minimum (the most absolute value) inside the nucleus, and vanishes when the distance from the nucleus goes to infinity, roughly in an inverse proportion to the distance. In the quantum-mechanical model, a bound electron can only occupy a set of states centered on the nucleus, and each state corresponds to a specific energy level; see time-independent Schrödinger equation for theoretical explanation. An energy level can be measured by the amount of energy needed to unbind the electron from the atom, and is usually given in units of electronvolts (eV). The lowest energy state of a bound electron is called the ground state,Template:Clarify while an electron transition to a higher level results in an excited state.[69] The electron's energy raises when n increases because the (average) distance to the nucleus increases. Dependence of the energy on [[azimuthal quantum number|Template:Ell]] is caused not by electrostatic potential of the nucleus, but by interaction between electrons.

For an electron to transition between two different states, it mustTemplate:Citation needed absorb or emit a photon at an energy matching the difference in the potential energy of those levels. The energy of an emitted photon is proportional to its frequency, so these specific energy levels appear as distinct bands in the electromagnetic spectrum.[70] Each element has a characteristic spectrum that can depend on the nuclear charge, subshells filled by electrons, the electromagnetic interactions between the electrons and other factors.[71]

File:Fraunhofer lines.svg

When a continuous spectrum of energy is passed through a gas or plasma, some of the photons are absorbed by atoms, causing electrons to change their energy level. Those excited electrons that remain bound to their atom spontaneously emit this energy as a photon, traveling in a random direction, and so drop back to lower energy levels. Thus the atoms behave like a filter that forms a series of dark absorption bands in the energy output. (An observer viewing the atoms from a view that does not include the continuous spectrum in the background, instead sees a series of emission lines from the photons emitted by the atoms.) Spectroscopic measurements of the strength and width of atomic spectral lines allow the composition and physical properties of a substance to be determined.[72]

Close examination of the spectral lines reveals that some display a fine structure splitting. This occurs because of spin–orbit coupling, which is an interaction between the spin and motion of the outermost electron.[73] When an atom is in an external magnetic field, spectral lines become split into three or more components; a phenomenon called the Zeeman effect. This is caused by the interaction of the magnetic field with the magnetic moment of the atom and its electrons. Some atoms can have multiple electron configurations with the same energy level, which thus appear as a single spectral line. The interaction of the magnetic field with the atom shifts these electron configurations to slightly different energy levels, resulting in multiple spectral lines.[74] The presence of an external electric field can cause a comparable splitting and shifting of spectral lines by modifying the electron energy levels, a phenomenon called the Stark effect.Template:Sfn

If a bound electron is in an excited state, an interacting photon with the proper energy can cause stimulated emission of a photon with a matching energy level. For this to occur, the electron must drop to a lower energy state that has an energy difference matching the energy of the interacting photon. The emitted photon and the interacting photon then move off in parallel and with matching phases. That is, the wave patterns of the two photons are synchronized. This physical property is used to make lasers, which can emit a coherent beam of light energy in a narrow frequency band.[75]

Valence and bonding behaviorEdit

Main article: Valence (chemistry)

The outermost electron shell of an atom in its uncombined state is known as the valence shell, and the electrons in that shell are called valence electrons. The number of valence electrons determines the bonding behavior with other atoms. Atoms tend to chemically react with each other in a manner that fills (or empties) their outer valence shells.[76] For example, a transfer of a single electron between atoms is a useful approximation for bonds that form between atoms with one-electron more than a filled shell, and others that are one-electron short of a full shell, such as occurs in the compound sodium chloride and other chemical ionic salts. However, many elements display multiple valences, or tendencies to share differing numbers of electrons in different compounds. Thus, chemical bonding between these elements takes many forms of electron-sharing that are more than simple electron transfers. Examples include the element carbon and the organic compounds.[77]

The chemical elements are often displayed in a periodic table that is laid out to display recurring chemical properties, and elements with the same number of valence electrons form a group that is aligned in the same column of the table. (The horizontal rows correspond to the filling of a quantum shell of electrons.) The elements at the far right of the table have their outer shell completely filled with electrons, which results in chemically inert elements known as the noble gases.[78][79]

StatesEdit

Main article: State of matter
File:Bose Einstein condensate.png

Quantities of atoms are found in different states of matter that depend on the physical conditions, such as temperature and pressure. By varying the conditions, materials can transition between solids, liquids, gases and plasmas. Template:Sfn Within a state, a material can also exist in different allotropes. An example of this is solid carbon, which can exist as graphite or diamond.[80] Gaseous allotropes exist as well, such as dioxygen and ozone.

At temperatures close to absolute zero, atoms can form a Bose–Einstein condensate, at which point quantum mechanical effects, which are normally only observed at the atomic scale, become apparent on a macroscopic scale.Template:Sfn[81] This super-cooled collection of atoms then behaves as a single super atom, which may allow fundamental checks of quantum mechanical behavior.[82] Template:Clear

IdentificationEdit

File:Atomic resolution Au100.JPG

The scanning tunneling microscope is a device for viewing surfaces at the atomic level. It uses the quantum tunneling phenomenon, which allows particles to pass through a barrier that would normally be insurmountable. Electrons tunnel through the vacuum between two planar metal electrodes, on each of which is an adsorbed atom, providing a tunneling-current density that can be measured. Scanning one atom (taken as the tip) as it moves past the other (the sample) permits plotting of tip displacement versus lateral separation for a constant current. The calculation shows the extent to which scanning-tunneling-microscope images of an individual atom are visible. It confirms that for low bias, the microscope images the space-averaged dimensions of the electron orbitals across closely packed energy levels—the Fermi level local density of states.[83][84]

An atom can be ionized by removing one of its electrons. The electric charge causes the trajectory of an atom to bend when it passes through a magnetic field. The radius by which the trajectory of a moving ion is turned by the magnetic field is determined by the mass of the atom. The mass spectrometer uses this principle to measure the mass-to-charge ratio of ions. If a sample contains multiple isotopes, the mass spectrometer can determine the proportion of each isotope in the sample by measuring the intensity of the different beams of ions. Techniques to vaporize atoms include inductively coupled plasma atomic emission spectroscopy and inductively coupled plasma mass spectrometry, both of which use a plasma to vaporize samples for analysis.[85]

A more area-selective method is electron energy loss spectroscopy, which measures the energy loss of an electron beam within a transmission electron microscope when it interacts with a portion of a sample. The atom-probe tomograph has sub-nanometer resolution in 3-D and can chemically identify individual atoms using time-of-flight mass spectrometry.[86]

Spectra of excited states can be used to analyze the atomic composition of distant stars. Specific light wavelengths contained in the observed light from stars can be separated out and related to the quantized transitions in free gas atoms. These colors can be replicated using a gas-discharge lamp containing the same element.[87] Helium was discovered in this way in the spectrum of the Sun 23 years before it was found on Earth.[88]

Origin and current stateEdit

Atoms form about 4% of the total energy density of the observable Universe, with an average density of about 0.25 atoms/m3.[89] Within a galaxy such as the Milky Way, atoms have a much higher concentration, with the density of matter in the interstellar medium (ISM) ranging from 105 to 109 atoms/m3.Template:Sfn The Sun is believed to be inside the Local Bubble, a region of highly ionized gas, so the density in the solar neighborhood is only about 103 atoms/m3.[90] Stars form from dense clouds in the ISM, and the evolutionary processes of stars result in the steady enrichment of the ISM with elements more massive than hydrogen and helium. Up to 95% of the Milky Way's atoms are concentrated inside stars and the total mass of atoms forms about 10% of the mass of the galaxy.Template:Sfn (The remainder of the mass is an unknown dark matter.)[91]

FormationEdit

Electrons are thought to exist in the Universe since early stages of the Big Bang. Atomic nuclei forms in nucleosynthesis reactions. In about three minutes Big Bang nucleosynthesis produced most of the helium, lithium, and deuterium in the Universe, and perhaps some of the beryllium and boron.[92][93][94]

Ubiquitousness and stability of atoms relies on their binding energy, which means that an atom has a lower energy than an unbound system of the nucleus and electrons. Where the temperature is much higher than ionization potential, the matter exists in the form of plasma – a gas of positively-charged ions (possibly, bare nuclei) and electrons. When the temperature drops below the ionization potential, atoms become statistically favorable. Atoms (complete with bound electrons) became to dominate over charged particles 380,000 years after the Big Bang—an epoch called recombination, when the expanding Universe cooled enough to allow electrons to become attached to nuclei.[95]

Since the Big Bang, which produced no carbon or heavier elements, atomic nuclei have been combined in stars through the process of nuclear fusion to produce more of the element helium, and (via the triple alpha process) the sequence of elements from carbon up to iron;[96] see stellar nucleosynthesis for details.

Isotopes such as lithium-6, as well as some beryllium and boron are generated in space through cosmic ray spallation.[97] This occurs when a high-energy proton strikes an atomic nucleus, causing large numbers of nucleons to be ejected.

Elements heavier than iron were produced in supernovae through the r-process and in AGB stars through the s-process, both of which involve the capture of neutrons by atomic nuclei.[98] Elements such as lead formed largely through the radioactive decay of heavier elements.[99]

EarthEdit

Most of the atoms that make up the Earth and its inhabitants were present in their current form in the nebula that collapsed out of a molecular cloud to form the Solar System. The rest are the result of radioactive decay, and their relative proportion can be used to determine the age of the Earth through radiometric dating.Template:Sfn[100] Most of the helium in the crust of the Earth (about 99% of the helium from gas wells, as shown by its lower abundance of helium-3) is a product of alpha decay.[101]

There are a few trace atoms on Earth that were not present at the beginning (i.e., not "primordial"), nor are results of radioactive decay. Carbon-14 is continuously generated by cosmic rays in the atmosphere.[102] Some atoms on Earth have been artificially generated either deliberately or as by-products of nuclear reactors or explosions.[103][104] Of the transuranic elements—those with atomic numbers greater than 92—only plutonium and neptunium occur naturally on Earth.[105][106] Transuranic elements have radioactive lifetimes shorter than the current age of the EarthTemplate:Sfn and thus identifiable quantities of these elements have long since decayed, with the exception of traces of plutonium-244 possibly deposited by cosmic dust.Template:Sfn Natural deposits of plutonium and neptunium are produced by neutron capture in uranium ore.[107]

The Earth contains approximately Template:Val atoms.[108] Although small numbers of independent atoms of noble gases exist, such as argon, neon, and helium, 99% of the atmosphere is bound in the form of molecules, including carbon dioxide and diatomic oxygen and nitrogen. At the surface of the Earth, an overwhelming majority of atoms combine to form various compounds, including water, salt, silicates and oxides. Atoms can also combine to create materials that do not consist of discrete molecules, including crystals and liquid or solid metals.[109][110] This atomic matter forms networked arrangements that lack the particular type of small-scale interrupted order associated with molecular matter.Template:Sfn

Rare and theoretical formsEdit

Superheavy elementsEdit

Main article: Transuranium element

While isotopes with atomic numbers higher than lead (82) are known to be radioactive, an "island of stability" has been proposed for some elements with atomic numbers above 103. These superheavy elements may have a nucleus that is relatively stable against radioactive decay.[111] The most likely candidate for a stable superheavy atom, unbihexium, has 126 protons and 184 neutrons.[112]

Exotic matter Edit

Main article: Exotic matter

Each particle of matter has a corresponding antimatter particle with the opposite electrical charge. Thus, the positron is a positively charged antielectron and the antiproton is a negatively charged equivalent of a proton. When a matter and corresponding antimatter particle meet, they annihilate each other. Because of this, along with an imbalance between the number of matter and antimatter particles, the latter are rare in the universe. The first causes of this imbalance are not yet fully understood, although theories of baryogenesis may offer an explanation. As a result, no antimatter atoms have been discovered in nature.[113][114] However, in 1996 the antimatter counterpart of the hydrogen atom (antihydrogen) was synthesized at the CERN laboratory in Geneva.[115][116]

Other exotic atoms have been created by replacing one of the protons, neutrons or electrons with other particles that have the same charge. For example, an electron can be replaced by a more massive muon, forming a muonic atom. These types of atoms can be used to test the fundamental predictions of physics.[117][118][119] Template:Category see also

See alsoEdit

Template:Col-start

| style="text-align: left; vertical-align: top; " |

| style="text-align: left; vertical-align: top; " |

|}

NotesEdit

  1. Cite error: Invalid <ref> tag; no text was provided for refs named leigh1990
  2. Cite error: Invalid <ref> tag; no text was provided for refs named slac_20090615
  3. Cite error: Invalid <ref> tag; no text was provided for refs named liddell_scott_to_cut
  4. Cite error: Invalid <ref> tag; no text was provided for refs named liddell_scott_uncuttable
  5. Cite error: Invalid <ref> tag; no text was provided for refs named haubold_mathai1998
  6. Template:Cite book Lederman provides an excellent discussion of this point, and this debate.
  7. Cite error: Invalid <ref> tag; no text was provided for refs named pratt20070928
  8. Cite error: Invalid <ref> tag; no text was provided for refs named kemerling20020808
  9. Cite error: Invalid <ref> tag; no text was provided for refs named lavoisier_eoc
  10. Cite error: Invalid <ref> tag; no text was provided for refs named adp322_8_549
  11. Cite error: Invalid <ref> tag; no text was provided for refs named lee_hoon1995
  12. Cite error: Invalid <ref> tag; no text was provided for refs named e31_2_50
  13. Cite error: Invalid <ref> tag; no text was provided for refs named pte20071101
  14. Cite error: Invalid <ref> tag; no text was provided for refs named nobel1096
  15. Cite error: Invalid <ref> tag; no text was provided for refs named pm21_669
  16. Cite error: Invalid <ref> tag; no text was provided for refs named npc1921
  17. Cite error: Invalid <ref> tag; no text was provided for refs named prsA_89_1_1913
  18. Cite error: Invalid <ref> tag; no text was provided for refs named stern20050516
  19. Cite error: Invalid <ref> tag; no text was provided for refs named bohr19221211
  20. Cite error: Invalid <ref> tag; no text was provided for refs named jacs38_4_762
  21. Cite error: Invalid <ref> tag; no text was provided for refs named jacs41_6_868
  22. Cite error: Invalid <ref> tag; no text was provided for refs named fop17_6_575
  23. Cite error: Invalid <ref> tag; no text was provided for refs named brown2007
  24. Cite error: Invalid <ref> tag; no text was provided for refs named harrison2000
  25. Cite error: Invalid <ref> tag; no text was provided for refs named pm39_6_449
  26. Cite error: Invalid <ref> tag; no text was provided for refs named chadwick1935
  27. Cite error: Invalid <ref> tag; no text was provided for refs named hahn_meitner_strassmann
  28. Cite error: Invalid <ref> tag; no text was provided for refs named nature143_3615_239
  29. Cite error: Invalid <ref> tag; no text was provided for refs named schroeder
  30. Cite error: Invalid <ref> tag; no text was provided for refs named pt50_9_26
  31. Cite error: Invalid <ref> tag; no text was provided for refs named kullander2001
  32. Cite error: Invalid <ref> tag; no text was provided for refs named npp1990
  33. Cite error: Invalid <ref> tag; no text was provided for refs named pdg2002
  34. Cite error: Invalid <ref> tag; no text was provided for refs named schombert2006
  35. Cite error: Invalid <ref> tag; no text was provided for refs named wenner2007
  36. Cite error: Invalid <ref> tag; no text was provided for refs named raymond
  37. Cite error: Invalid <ref> tag; no text was provided for refs named mihos2002
  38. Cite error: Invalid <ref> tag; no text was provided for refs named lbnl20070330
  39. Cite error: Invalid <ref> tag; no text was provided for refs named makhijani_saleska2001
  40. Cite error: Invalid <ref> tag; no text was provided for refs named ajp63_7_653
  41. Cite error: Invalid <ref> tag; no text was provided for refs named science157_3784_13
  42. Cite error: Invalid <ref> tag; no text was provided for refs named Brucat2008
  43. Cite error: Invalid <ref> tag; no text was provided for refs named manthey2001
  44. Cite error: Invalid <ref> tag; no text was provided for refs named herter_8
  45. Cite error: Invalid <ref> tag; no text was provided for refs named pr79_2_282
  46. Cite error: Invalid <ref> tag; no text was provided for refs named matis2000
  47. Cite error: Invalid <ref> tag; no text was provided for refs named weiss20061017
  48. Cite error: Invalid <ref> tag; no text was provided for refs named dume20030423
  49. Cite error: Invalid <ref> tag; no text was provided for refs named lidsay20000730
  50. Cite error: Invalid <ref> tag; no text was provided for refs named tuli2005
  51. 51.0 51.1 CRC Handbook (2002).
  52. 52.0 52.1 Mills et al. (1993).
  53. Cite error: Invalid <ref> tag; no text was provided for refs named chieh2001
  54. Cite error: Invalid <ref> tag; no text was provided for refs named nist_wc
  55. Cite error: Invalid <ref> tag; no text was provided for refs named audi2003
  56. Cite error: Invalid <ref> tag; no text was provided for refs named aca32_5_751
  57. Cite error: Invalid <ref> tag; no text was provided for refs named dong1998
  58. Zumdahl (2002).
  59. Cite error: Invalid <ref> tag; no text was provided for refs named adp5f_3_133
  60. Cite error: Invalid <ref> tag; no text was provided for refs named pssb245_9_1858
  61. Cite error: Invalid <ref> tag; no text was provided for refs named osu2007
  62. Padilla et al. (2002:32)—"There are 2,000,000,000,000,000,000,000 (that's 2 sextillion) atoms of oxygen in one drop of water—and twice as many atoms of hydrogen."
  63. Cite error: Invalid <ref> tag; no text was provided for refs named splung
  64. Cite error: Invalid <ref> tag; no text was provided for refs named firestone20000522
  65. Cite error: Invalid <ref> tag; no text was provided for refs named hornak2006
  66. Cite error: Invalid <ref> tag; no text was provided for refs named schroeder2
  67. Cite error: Invalid <ref> tag; no text was provided for refs named goebel20070901
  68. Cite error: Invalid <ref> tag; no text was provided for refs named yarris1997
  69. Cite error: Invalid <ref> tag; no text was provided for refs named zeghbroeck1998
  70. Fowles (1989:227–233).
  71. Cite error: Invalid <ref> tag; no text was provided for refs named martin2007
  72. Cite error: Invalid <ref> tag; no text was provided for refs named avogadro
  73. Cite error: Invalid <ref> tag; no text was provided for refs named fitzpatrick20070216
  74. Cite error: Invalid <ref> tag; no text was provided for refs named weiss2001
  75. Cite error: Invalid <ref> tag; no text was provided for refs named watkins_sjsu
  76. Cite error: Invalid <ref> tag; no text was provided for refs named reusch20070716
  77. Cite error: Invalid <ref> tag; no text was provided for refs named chemguide
  78. Cite error: Invalid <ref> tag; no text was provided for refs named husted20031211
  79. Cite error: Invalid <ref> tag; no text was provided for refs named baum2003
  80. Cite error: Invalid <ref> tag; no text was provided for refs named pu49_7_719
  81. Cite error: Invalid <ref> tag; no text was provided for refs named nist_bec
  82. Cite error: Invalid <ref> tag; no text was provided for refs named colton_fyffe1999
  83. Cite error: Invalid <ref> tag; no text was provided for refs named jacox1997
  84. Cite error: Invalid <ref> tag; no text was provided for refs named nf_physics1986
  85. Cite error: Invalid <ref> tag; no text was provided for refs named sab53_13_1739
  86. Cite error: Invalid <ref> tag; no text was provided for refs named rsi39_1_83
  87. Cite error: Invalid <ref> tag; no text was provided for refs named lochner2007
  88. Cite error: Invalid <ref> tag; no text was provided for refs named winter2007
  89. Cite error: Invalid <ref> tag; no text was provided for refs named hinshaw20060210
  90. Cite error: Invalid <ref> tag; no text was provided for refs named science259_5093_327
  91. Cite error: Invalid <ref> tag; no text was provided for refs named nigel2000
  92. Cite error: Invalid <ref> tag; no text was provided for refs named ns1794_42
  93. Cite error: Invalid <ref> tag; no text was provided for refs named science267_5195_192
  94. Cite error: Invalid <ref> tag; no text was provided for refs named hinshaw20051215
  95. Cite error: Invalid <ref> tag; no text was provided for refs named abbott20070530
  96. Cite error: Invalid <ref> tag; no text was provided for refs named mnras106_343
  97. Cite error: Invalid <ref> tag; no text was provided for refs named nature405_656
  98. Cite error: Invalid <ref> tag; no text was provided for refs named mashnik2000
  99. Cite error: Invalid <ref> tag; no text was provided for refs named kgs20050504
  100. Cite error: Invalid <ref> tag; no text was provided for refs named gs190_1_205
  101. Cite error: Invalid <ref> tag; no text was provided for refs named anderson_foulger_meibom2006
  102. Cite error: Invalid <ref> tag; no text was provided for refs named pennicott2001
  103. Cite error: Invalid <ref> tag; no text was provided for refs named yarris2001
  104. Cite error: Invalid <ref> tag; no text was provided for refs named pr119_6_2000
  105. Cite error: Invalid <ref> tag; no text was provided for refs named poston1998
  106. Cite error: Invalid <ref> tag; no text was provided for refs named cz97_10_522
  107. Cite error: Invalid <ref> tag; no text was provided for refs named ofr_cut
  108. Cite error: Invalid <ref> tag; no text was provided for refs named weisenberger
  109. Cite error: Invalid <ref> tag; no text was provided for refs named pidwirnyf
  110. Cite error: Invalid <ref> tag; no text was provided for refs named pnas99_22_13966
  111. Cite error: Invalid <ref> tag; no text was provided for refs named cern28509
  112. Cite error: Invalid <ref> tag; no text was provided for refs named cen84_10_19
  113. Cite error: Invalid <ref> tag; no text was provided for refs named koppes1999
  114. Cite error: Invalid <ref> tag; no text was provided for refs named cromie20010816
  115. Cite error: Invalid <ref> tag; no text was provided for refs named nature419_6906_439
  116. Cite error: Invalid <ref> tag; no text was provided for refs named BBC20021030
  117. Cite error: Invalid <ref> tag; no text was provided for refs named ns1728_77
  118. Cite error: Invalid <ref> tag; no text was provided for refs named psT112_1_20
  119. Cite error: Invalid <ref> tag; no text was provided for refs named ripin1998

ReferencesEdit

Encyclopædia Britannica

Book referencesEdit

Template:Refbegin

Template:Refend

External linksEdit

Template:Sister project links

  • Script error
  • Script error
  • Script error
  • Script error—a guide to the atom for teens.
  • Script error
  • Script error
  • Script error

Template:Particles Template:Composition Template:Biological organisation Template:Featured article


Cite error: <ref> tags exist for a group named "note", but no corresponding <references group="note"/> tag was found.
Community content is available under CC-BY-SA unless otherwise noted.